Siemens QMX3.P30 Instruction Manual
Wall-mounted sensors and room operator units
Hide thumbs
Also See for QMX3.P30:
- Technical principles (40 pages) ,
- Technical principles (46 pages) ,
- Manual (16 pages)
Table of Contents
s
Wall-mounted sensors and room
operator units for KNX PL-Link,
KNX S-mode and KNX LTE-Mode
CM2N1602en_07
2017-05-22
QMX3.P37
QMX3.P34 / P74
Desigo™ TRA
Communicative sensors, switches and room operator units with KNX (S-mode,
LTE-Mode) or KNX PL-Link (for Desigo™ Total Room Automation)
Functions (depending on type):
• Energy efficiency function ("Green Leaf
• Room temperature, CO
• Control of light, blinds, and scenes
• PID controller for room temperature or ventilation (KNX S-mode)
• LCD Display for room temperature, operating mode, etc.
• Label for light, blinds and scenes (exchangeable, created with Word
template)
• Operation via 8 or 16 touchkeys
• Interface KNX (S-mode, LTE-Mode) and KNX PL-Link(for TRA, with plug &
play functionality)
• Powered over KNX PL-Link / KNX bus
• LEDs to indicate the switch state or the position of the device in dark rooms
QMX3.P02
")
, and humidity measurement
2
1
QMX3.P70
QMX3.P30 / P40
QMX3.P30
QMX3.P40
QMX3.P70
QMX3.P02
QMX3.P34
QMX3.P74
QMX3.P37
Building Technologies
602
Table of Contents
Related Manuals for Siemens QMX3.P30
Summary of Contents for Siemens QMX3.P30
- Page 1 QMX3.P37 QMX3.P34 / P74 QMX3.P02 QMX3.P70 QMX3.P30 / P40 QMX3.P30 Desigo™ TRA Wall-mounted sensors and room QMX3.P40 operator units for KNX PL-Link, QMX3.P70 KNX S-mode and KNX LTE-Mode QMX3.P02 QMX3.P34 QMX3.P74 QMX3.P37 Communicative sensors, switches and room operator units with KNX (S-mode, LTE-Mode) or KNX PL-Link (for Desigo™...
- Page 2 Control (with a PID controller) − of the relative humidity – of the room temperature of the CO concentration − 2 / 16 QMX3... Wall-mounted sensors and room operator units for KNX PL-Link, KNX S-mode and KNX LTE-Mode CM2N1602en_07 Siemens Building Technologies 2017-05-22...
- Page 3 − − selecting and saving of scenes Use with LTE can only use the sensor information of the types QMX3.P30, QMX3.P40, and KNX LTE-Mode QMX3.P70. NOTICE Devices with CO measurement are not suitable for safety applications such as gas or smoke alarm.
- Page 4 • Adhere to allowed ambient conditions. Mounting instructions • Mounting instructions M1602 are enclosed with the devices. 4 / 16 QMX3... Wall-mounted sensors and room operator units for KNX PL-Link, KNX S-mode and KNX LTE-Mode CM2N1602en_07 Siemens Building Technologies 2017-05-22...
- Page 5 3 The gray foam plate (removable) compensates for the jutting edge of the box so that the plate is aligned with the wall. 5 / 16 QMX3... Wall-mounted sensors and room operator units for KNX PL-Link, KNX S-mode and KNX LTE-Mode CM2N1602en_07 Siemens Building Technologies 2017-05-22...
- Page 6 20 mm (from below) to the base plate, so that the device can be snapped onto the base plate. 30 mm Dismounting / service: 6 / 16 QMX3... Wall-mounted sensors and room operator units for KNX PL-Link, KNX S-mode and KNX LTE-Mode CM2N1602en_07 Siemens Building Technologies 2017-05-22...
- Page 7 • Observe all local installation regulations. Caution! • The devices are not protected against accidental connection to AC 230 V. 7 / 16 QMX3... Wall-mounted sensors and room operator units for KNX PL-Link, KNX S-mode and KNX LTE-Mode CM2N1602en_07 Siemens Building Technologies 2017-05-22...
- Page 8 Note! This operation resets all user preference data and configuration settings to factory default. This operation is irreversible. 8 / 16 QMX3... Wall-mounted sensors and room operator units for KNX PL-Link, KNX S-mode and KNX LTE-Mode CM2N1602en_07 Siemens Building Technologies 2017-05-22...
- Page 9 This operation resets all user preference data and configuration settings to NOTICE factory default. This operation is irreversible. 9 / 16 QMX3... Wall-mounted sensors and room operator units for KNX PL-Link, KNX S-mode and KNX LTE-Mode CM2N1602en_07 Siemens Building Technologies 2017-05-22...
- Page 10 In this case, manual commissioning must be performed (see above). 10 / 16 QMX3... Wall-mounted sensors and room operator units for KNX PL-Link, KNX S-mode and KNX LTE-Mode CM2N1602en_07 Siemens Building Technologies 2017-05-22...
- Page 11 Saving a changed scene (long press > 5s). ● LED flashes during 3 s. When it goes off, the user can release the key. 11 / 16 QMX3... Wall-mounted sensors and room operator units for KNX PL-Link, KNX S-mode and KNX LTE-Mode CM2N1602en_07 Siemens Building Technologies 2017-05-22...
- Page 12 • Operation of the occupancy state (presence switch, Comfort prolongation) • Activate the Comfort prolongation using key 8 (only available if enabled) 12 / 16 QMX3... Wall-mounted sensors and room operator units for KNX PL-Link, KNX S-mode and KNX LTE-Mode CM2N1602en_07 Siemens Building Technologies 2017-05-22...
-
Page 13: Technical Data
• Rough handling during transport, storage or mounting might adversely affect accuracy during the first days of operation. • The specified accuracy is reached after 25 days of continuous operation. 13 / 16 QMX3... Wall-mounted sensors and room operator units for KNX PL-Link, KNX S-mode and KNX LTE-Mode CM2N1602en_07 Siemens Building Technologies 2017-05-22... - Page 14 Operator unit Base plate Packaging Total The documents can be downloaded from http://siemens.com/bt/download. Notes on FCC rules This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) NOTICE this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 15 To the room unit using the tool cable and the OCI702 service interface (see data sheet A6V10438951). 15 / 16 QMX3... Wall-mounted sensors and room operator units for KNX PL-Link, KNX S-mode and KNX LTE-Mode CM2N1602en_07 Siemens Building Technologies 2017-05-22...
- Page 16 • Dispose of the device through channels provided for this purpose. • Comply with all local and currently applicable laws and regulations. 16 / 16 Siemens Switzerland Ltd, 2013 Subject to change QMX3... Wall-mounted sensors and room operator units for KNX PL-Link, KNX S-mode and KNX LTE-Mode...