[Auto Setup Setting]; [Signal Search]; [Back Color]; [P-Timer] - Panasonic PT-VZ580 Operating Instructions (Functional Manual)
Commercial use
Hide thumbs
Also See for PT-VZ580:
- Operating instructions manual (134 pages) ,
- Operating instructions manual (134 pages)
Table of Contents
1)
Press as to select [STARTUP LOGO].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT LOGO]
[USER LOGO]
[OFF]
Note
f The startup logo will disappear in approximately 30 seconds.
f To create/register the [USER LOGO] image, use "Logo Transfer Software" included in the supplied CD-ROM.
[AUTO SETUP SETTING]
Set the automatic execution of AUTO SETUP.
Dot clock, clock phase and image position can be adjusted automatically without pressing the
button each time when unregistered signals are input frequently at meetings, etc.
1)
Press as to select [AUTO SETUP SETTING].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[BUTTON]
[SIGNAL SEARCH]
Set to enable/disable the signal search function.
If the signal search function is enabled, the input with input signal is automatically selected when the power is
turned on and the projection is started. In addition, if the button is pressed when the currently
selected input has no signal, it automatically switches to the input with input signal.
1)
Press as to select [SIGNAL SEARCH].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
[BACK COLOR]
Set the display of the projected screen when there is no signal input.
1)
Press as to select [BACK COLOR].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[BLUE]
[BLACK]
[DEFAULT LOGO]
[USER LOGO]
Note
f To create/register the [USER LOGO] image, use "Logo Transfer Software" included in the supplied CD-ROM.
[P-TIMER]
Set and operate the presentation timer function.
72 - ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu
Displays the Panasonic logo.
Displays the image registered by the user.
Disables the startup logo display.
If the image being projected changes to an unregistered signal, the auto setup is automatically performed.
Enables the auto setup function only when the button is pressed.
Enables the input detection function.
Disables the input detection function.
Displays the entire projection area in blue.
Displays the entire projection area in black.
Displays the Panasonic logo.
Displays the image registered by the user.
- Quick Links:
- Lamp and Temperature Indicators
Hide quick links:
Chapters
Table of Contents
