Projecting; Selecting The Image Input For Projection - Panasonic PT-VZ580 Operating Instructions (Functional Manual)
Commercial use
Hide thumbs
Also See for PT-VZ580:
- Operating instructions manual (134 pages) ,
- Operating instructions manual (134 pages)
Table of Contents
Projecting
Check the connections of the external devices (
and then power on the projector (
image.
Selecting the image input for projection
Switch the image input for projection. Method to switch the input is as follows.
f Press the input selection buttons on the remote control and directly specify the input to project.
f Press the button on the control panel to display the input guide and select the input to be
projected.
Switching the input directly with the remote control
The input for projection can be switched by directly specifying it with the input selection button on the remote
control.
1)
Press the input selection buttons (, ,
Remote control buttons
f When switching inputs, the input guide for detailed or simple display is temporarily displayed. For the input
guide, refer to "Switching the input with the control panel" (
→ [ON-SCREEN DISPLAY] → [INPUT GUIDE].
Attention
f Images may not be projected properly depending on the external device, or the Blu-ray disc or DVD disc, to be played back. Set the
following menu items according to the input signal.
g [PICTURE] menu → [TV-SYSTEM]
g [PICTURE] menu → [RGB/YC
g [PICTURE] menu → [RGB/YP
g [PICTURE] menu → [RGB-SYSTEM]
f Confirm the aspect ratio of the projection screen and the image, and switch to an optimum aspect ratio from the [POSITION] menu →
[ASPECT].
Chapter 3 Basic Operations - Projecting
Æ
page 31) and connection of the power cord (
Æ
page 36) to start projecting. Select the image and adjust the state of the
Remote control
リモコン
Input
COMPUTER 1
COMPUTER 2
VIDEO
HDMI 1
HDMI 2
C
]
B
R
P
]
B
R
Control panel
本体操作部
Switches the input to COMPUTER 1.
Displays the image signals input via the
terminal.
Switches the input to COMPUTER 2.
Displays the image signals input via the
terminal.
Switches the input to VIDEO.
Displays the image signals input via the
Switches the input to HDMI 1.
Displays the image signals input via the terminal.
Switches the input to HDMI 2.
Displays the image signals input via the terminal.
Æ
page 42) or the [DISPLAY OPTION] menu
Æ
page 35)
Usage
ENGLISH - 41
- Quick Links:
- Lamp and Temperature Indicators
Hide quick links:
Chapters
Table of Contents
