Table of Contents
General Product Description
Remote PIM cannot be connected with main site due to the IP network and/or main PBX
failure, the Remote PIM initializes the system and re-starts operation by its own Main
Processor (survival mode). In the survival mode, almost all service features are provided
to the station users accommodated in Remote PIM. When the IP network/main PBX
recovers, the Remote PIM can be restored to normal mode with a system initialization by
manual operation or automatically (Selectable by system data setting).
-
IPS Remote PIM with CP24 MP
-
IPS DMR with CP31 MP
1.5 Software Architecture
SOPHO IPS systems use Software Keys (TDM and AP) and Peer-to-Peer IP Seat
Licenses to define a modular system. This approach allows customers a greater degree of
cost-control for new installations and for upgrades of features, capacities and software
series.
Installing the SOPHO IPS systems requires activating Basic System software, and
optional features and seat licenses from the software key (on a Floppy Disk). The
software is loaded into MP by using MATWorX IPS. Once the software is loaded, that
software cannot be used to OTHER system (Copy protected). A maximum of 32 software
keys can be loaded per system. If the system is Dual MP System, the software is required
to load on each MP in order to register the software data into each MP. (Dual MPs are
configured with the same serial number)
1.5.1 Generic Program (Basic System Software)
64 Port System Software provides Basic Business/Hotel/Motel Features for:
-
64 LT Ports,
-
5 T1's /E1's,
-
5 ISDN-PRI DCH's,
-
48 ISDN-BRI Trunks.
NEC Customer Software License Agreement Required
1.5.2 Optional Software
The Key Keeper (FD) Floppy Disk holds the selected Key files from the options below:
Description
LT 64 PORT
CCIS Link (1)
CCIS Link (4)
CCIS Link (8)
IPT Card (1)
IPT Card (4)
IPT Card (8)
Event Based CCIS(ECCIS) Key Adds Event Based CCIS capability
T1/E1 6 to 10
NEC Philips Unified Solutions
Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Sopho 2000IPS
Remarks
64 Port Line/Trunk Key (incremental)
Expands LT Ports from 64 to 1020 Ports in increments
of 64. Stand alone system maximum 512 LT ports,
Remote PIM Network maximum 1020 LT ports.
Adds support for one CCIS Link
Adds support for four CCIS Link
Adds support for eight CCIS Link
Adds support for one IP trunk card
Adds support for four IP trunk card
Adds support for eight IP trunk card
Expands T1/E1 capacity between 144 to 240 channels
UPD
© NEC Philips Unified Solutions, 2006. All right reserved.
Release 12.2, August 2006
22 of 259
Table of Contents
