Afis Flight Plan Selection; To Enter An Afis Flight Plan - Honeywell GNS-XLS Operator's Manual

Flight management system
Table of Contents
SYSTEM OPERATION
PRE-DEPARTURE

AFIS FLIGHT PLAN SELECTION

The AFIS FLIGHT PLAN LIST Page appears after the Initialization
Page. The page also appears between the Active Flight Plan Page
and the first GNS-X
NOTE: For aircraft equipped with the Antenna Switching Unit,
DEPRESS momentary AFIS annunciator to enable the air to ground
data link.
TO ENTER AN AFIS FLIGHT
PLAN
1. Preprogrammed AFIS Disk
- INSERT disk into DTU.
2. Select AFIS FLIGHT PLAN
LIST Page using either (a)
or (b).
a.
Initialization Page -
Enter Date, GMT, and Initial
Position. AFIS FLIGHT
PLAN LIST Page appears.
b.
FPL Key - DEPRESS until desired AFIS FLIGHT PLAN
LIST Page appears. (Figure 7-39)
NOTE: Desired flight plan may be found on a subsequent page if
more than six flight plans have been either transferred from the disk or
received via the data link. If there is more than one Flight Plan with the
same Departure/ Destination pair
a random letter will be displayed
between the Depart?Dest pair
and the date. This letter and the
date distinguish one FPL from
the other.
3. Line
Select
DEPRESS to place cursor
over desired Flight Plan.
(Figure 7-40)
Rev. 3
GNS-X
Sep/96
FLIGHT PLAN LIST Page.
LS
Key
-
Flight Management System AFIS Operation
LS
AFIS
FLIGHT PLAN LIST 1/4
<
CYUL-KJFK
KJFK-KORD
<
KORD-KSNA
KSNA-KSTL
<
GUIII
Figure 7-39
AFIS
FLIGHT PLAN LIST 1/4
<
CYUL-KJFK
KJFK-KORD
<
KORD-KSNA
KSNA-KSTL
<
REPLACE ACTIVE FPL?
Figure 7-40
06APR9O
06APR90
06APR90
09APR90
06APR9O
06APR90
06APR90
09APR90
7-27

Hide quick links:

Table of Contents
loading

Table of Contents