Measuring With Peak Cursors (Peak) - YOKOGAWA DL850E User Manual
Scopecorder
Hide thumbs
Also See for DL850E:
- User manual (228 pages) ,
- User manual (270 pages) ,
- Workbook (43 pages)
Table of Contents
7.6
Measuring with Peak Cursors (Peak)
This section explains the following settings (which are used when measuring with peak cursors). You
can use peak cursors when the FFT window is displayed.
• Measurement source window
• Cursor type
• Measurement range
• Measurement items
► "Peak Cursors (Peak)" and "Turning the FFT On and Off (Display)" in the Features Guide.
CURSOR Peak Menu
1.
Press CURSOR, the Select Window soft key, and then the FFT soft key to display the following
menu.
2.
Press the Type soft key, and then the Peak soft key to display the following menu.
Note
On models that do not have the user-defined computation option, the measurement range settings for FFT2
(FFT2 Range 1 and FFT2 Range 2) and measurement items F2 and Y2 do not appear.
7-6
Set Select Window to FFT.
Set Type to Peak.
Set the FFT1 measurement range
(using the jog shuttle).
Set the FFT2 measurement range
(using the jog shuttle).
Press to configure the
measurement items.
Select the items that
you want to measure.
IM DL850E-02EN
- Quick Links:
- Configuring Voltage Measurements
Hide quick links:
Table of Contents
