NEC univerge SV9100 Programming Manual page 606
Hide thumbs
Also See for univerge SV9100:
- Features and specifications (1403 pages) ,
- Manual (766 pages) ,
- System hardware manual (740 pages)
Table of Contents
Input Data (Continued)
Item
No.
08
Centralized Voice Mail Department Group
Number
Assign which Extension (Department) Group
Number is used as the Centralized Voice Mail group.
09
Centralized Voice Mail Master Name
Assign the Centralized Voice Mail Master Name.
10
New NSL Protocol support
11
Prefix for Call Screening
12
Prefix for Park and Page
13
Prefix for Message Wait
14
CCIS Centralized Voice Mail Number
Assign the pilot number to Centralized Voice Mail
over CCIS Link. This is assigned only in the remote
switches.
15
Analog Voice Mail Protocol Selection
Assign whether fixed codes or the codes used in
PRG 45-04 are used for analog voice mail protocol.
16
Voice Mail Fax Digit Add Assignment
Assign up to four digits in front of the station number
sent to the SLT port when a call is forwarded.
17
Reply Mailbox Number
Select whether or not to include the mailbox number
in the analog voice mail protocol.
18
Trunk Number Mapping
Assign the digits of trunk number mapping.
19
Centralized Voice Mail Type
Assign which Centralized Voice Mail types to use,
Retro (Aspire) or Enhanced (Cygnus).
2-566
Item
Input Data
Default
0~64
"C.V.M."
Up to 12 characters
0 = Off
1 = On
Dial (One digit)
Dial (One digit)
Dial (One digit)
Dial (up to eight
No Setting
digits)
0: Fixed
1: Program
Up to four digits
0: No
1: Yes
2~3
0 = Retro
1 = Enhanced
Program 45 : Voice Mail Integration
Issue 4.0
0
0
1
#
0
None
1
2
1
Table of Contents
