Dimensions And Mounting Methods; Surface Mounting The Size 3 Drive - Emerson Powerdrive F300 User Manual
Universal variable speed ac drive for
induction and permanent magnet
motors
Hide thumbs
Also See for Powerdrive F300:
- Reference manual (342 pages) ,
- Getting started manual (111 pages)
Table of Contents
Safety
Product
Mechanical
information
information
installation
3.5
Dimensions and mounting methods
The drive can be either surface or through-panel mounted using the appropriate brackets. The following drawings show the dimensions of the drive
and mounting holes for each method to allow a back plate to be prepared.
The Through-panel mounting kit is not supplied with the drive and can be purchased separately, below are the relevant part numbers:
Size
3
4
5
6
7
8
9A
9E/10E
11E
If the drive has been used at high load levels for a period of time, the heatsink can reach temperatures in excess of 70 °C (158 °F). Human
contact with the heatsink should be prevented.
WARNING
Many of the drives in this product range weigh in excess of 15 kg (33 lb). Use appropriate safeguards when lifting these models.
A full list of drive weights can be found in section 12.1.19 Weights on page 244.
WARNING
3.5.1
Surface mounting
Figure 3-15 Surface mounting the size 3 drive
83 mm (3.27 in)
382 mm
(15.04 in)
NOTE
Each mounting bracket contains 4 mounting holes, the outer holes (5.5 mm) x 2 should be used for mounting the drive to the backplate as this allows
the heatsink fan to be replaced without removing the drive from the backplate. The inner holes (6.5 mm) x 2 are used for Unidrive SP size 1 retrofit
applications. See Table 3-2 for further information.
32
Electrical
Getting
Basic
installation
started
parameters
CT part number
3470-0053
3470-0056
3470-0067
3470-0055
3470-0079
3470-0083
3470-0119
3470-0105
3470-0126
200 mm (7.87 in)
365 mm
(14.37 in)
Running
NV Media Card
Optimization
the motor
Operation
Onboard
Advanced
Technical
Diagnostics
PLC
parameters
data
73.0 mm (2.87 in)
6.0 mm
40.0 mm
(0.24 in)
(1.58 in)
370 mm (14.57 in)
Æ 6.5 mm
(0.26 in)
Powerdrive F300 User Guide
UL listing
information
Æ 5.5 mm
(0.22 in)
Issue Number: 2
- Quick Links:
- Trip Indications
Hide quick links:
Table of Contents
