Hitachi WH 14DMR Tp1692En
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Impact Driver
  5. DS 14DMR
  6. Tp1692en

Hitachi WH 14DMR Tp1692En

Hide thumbs Also See for WH 14DMR:
Table of Contents

Quick Links

See also: Technical Data and Service Manual
WH 14DMR
Model
Modèle
Modelo
WR 14DMR
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool. This manual should
be stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D'EMPLOI
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la
mort ou de sérieuses blessures corporelles !
Ce mode d'emploi contient d'importantes informations à propos de la sécurité de ce
produit. Prière de lire et de comprendre ce mode d'emploi AVANT d'utiliser l'outil
motorisé. Garder ce mode d'emploi à la disponibilité des autres utilisateurs et propriétaires
avant qu'ils utilisent l'outil motorisé. Ce mode d'emploi doit être conservé dans un
endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede
resultar en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este
manual para que puedan leerlo otras personas antes de utilizar la herramienta
eléctrica. Este manual debe ser guardado en un lugar seguro.
WH 14DL
WH 18DMR
•
•
WR 14DL
WR 18DMR
•
•
WH18DL
WARNING
AVERTISSEMENT
ADVERTENCIA
Cordless Impact Driver
WH 18DL
•
Visseuse à percussion à batterie
Atornillador de impacto a battería
Cordless Impact Wrench
WR 18DL
•
Clé à choc à batterie
Llave de impacto a batería
WR18DL
Table of Contents
loading

Related Manuals for Hitachi WH 14DMR

Summary of Contents for Hitachi WH 14DMR

  • Page 1 Cordless Impact Driver WH 14DMR WH 14DL WH 18DMR WH 18DL • • • Visseuse à percussion à batterie Model Atornillador de impacto a battería Modèle Cordless Impact Wrench Modelo WR 14DMR WR 14DL WR 18DMR WR 18DL • •...

  • Page 2: Table Of Contents

    CONTENTS English Page Page IMPORTANT SAFETY INFORMATION ....3 CAUTION ON LITHIUM–ION BATTERY ....6 MEANINGS OF SIGNAL WORDS ......3 FUNCTIONAL DESCRIPTION ........7 SAFETY ..............3 SPECIFICATIONS ..........7 GENERAL SAFETY RULES – FOR ALL BATTERY ASSEMBLY AND OPERATION ......... 8 OPERATED TOOLS ........

  • Page 3: Important Safety Information

    Hazards that must be avoided to prevent bodily injury or machine damage are identified by WARNINGS on the power tool and in this Instruction Manual. NEVER use this power tool in a manner that has not been specifically recommended by HITACHI. MEANINGS OF SIGNAL WORDS WARNING indicates a potentially hazardous situations which, if ignored, could result in death or serious injury.

  • Page 4: Specific Safety Rules

    English (3) Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired. (4) Disconnect battery pack from tool or place the switch in the locked or off position before making any adjustments, changing accessories, or storing the tools.

  • Page 5: Important Safety Instructions For Use Of The Cordless Impact Driver / Wrench

    Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. To reduce risk of injury, charge HITACHI rechargeable battery type EB7, EB9, EB12, EB14, EB18 series, BCL1430, EBL1430, EBM1430 and EBM1830. Other type of batteries may burst causing personal injury and damage.

  • Page 6: Important Safety Instructions For Use Of The Battery And Battery Charger

    UC24YFA or UC18YG or UC18YRL battery charger, be sure to read all instructions and cautionary statements on it, the battery and in this manual. REMEMBER: USE ONLY HITACHI BATTERY TYPES EB7 SERIES, EB9 SERIES, EB12 SERIES, EB14 SERIES. EB18 SERIES, BCL1430, EBL1430, EBM1430 AND EBM1830. OTHER TYPES OF BATTERIES MAY BURST AND CAUSE...

  • Page 7: Functional Description

    English SAVE THESE INSTRUCTIONS FUNCTIONAL DESCRIPTION NOTE: The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the power tool. NEVER operate, or attempt any maintenance on the tool unless you have first read and understood all safety instructions contained in this manual.

  • Page 8: Assembly And Operation

    English Charger Model UC14YFA UC24YFA UC18YG UC18YRL Charging voltage 7.2 – 14.4 V 7.2 – 24 V 7.2 – 18 V 7.2 – 18 V 1.4 Ah : Ni-Cd 30 min. 40 min. 30 min. 20 min. 2.0 Ah : Ni-Cd 50 min.
  • Page 9 English Table 2 Indications of the lamps Lights for 0.5 seconds. Does not light for Before Blinks 0.5 seconds. (off for 0.5 seconds) charging (RED) While Lights Lights continuously (RED) charging Lights for 0.5 seconds. Does not light for Blinks Charging 0.5 seconds.

  • Page 10: Operation

    English CAUTION: If the battery is heated due to direct sunlight, etc., just after operation, the charger pilot lamp may not light up. At that time, cool the battery first, then start charging. Disconnect the charger power cord from the receptacle Hold the charger tight and pull out the battery Regarding electric discharge in case of new batteries, etc.
  • Page 11 English (2) The direction of the light can be adjusted within the range of hook positions 1 – 5. (Fig. 6) Switch Larger diameter faces away Spring Fig. 5 Fig. 4 Fig. 6 Lighting time AAAA manganese batteries: approx. 15 hrs. AAAA alkali batteries: approx.
  • Page 12 (3) When removing the socket, pull it out of the anvil. CAUTION: Please use the designated attachments which are listed in the operations manual and Hitachi’s catalog. Accidents or injuries could result from not doing so. Make sure to firmly install the socket in the anvil. If the socket is not firmly installed it might come out and cause injuries.

  • Page 13: Operational Cautions

    English CAUTION: In the work of the save mode (S), avoid the continuous screw-tightening as temperature of electronic components of the converter switch increases. 11. Tightening and loosening screws Install the bit that matches the screw, line up the bit in the grooves of the head of the screw, then tighten it. Push the impact driver just enough to keep the bit fitting the head of the screw.

  • Page 14: Maintenance And Inspection

    NOTE: When replacing the carbon brush with a new one, be sure to use 11.5mm the Hitachi Carbon Brush Code No. 999054. Fig. 14 Replacing carbon brushes Take out the carbon brush by first removing the brush cap and then...

  • Page 15: Accessories

    ALWAYS use Only authorized HITACHI replacement parts and accessories. NEVER use replacement parts or accessories which are not intended for use with this tool. Contact HITACHI if you are not sure whether it is safe to use a particular replacement part or accessory with your tool.
  • Page 26 Please contact HITACHI KOKI U.S.A. LTD. at 1-800-59-TOOLS (toll free), or HITACHI AUTHORIZED POWER TOOL SERVICE CENTER recarding COLLECTION. Pour le RAMASSAGE, contacter HITACHI KOKI U.S.A. LTD. au 1-800-59-TOOLS (appel gratuit), ou UN SERVICE APRES-VENTE D’OUTILS ELECTRIQUE AGREE PAR HITACHI.

This manual is also suitable for:

Wh 14dlWh 18dlWr 14dmrWr 18dlWr 18dmrWh 18dmr

Table of Contents