Christie DLV1400-DX User Manual page 92
Hide thumbs
Also See for DLV1400-DX:
- Instruction sheet (6 pages) ,
- Specifications (2 pages) ,
- User manual (178 pages)
Table of Contents
Section 3: Operation
3-66
Downloaded From projector-manual.com Christie Manuals
•
Show Blending Overlap
defined blend width area to solid gray so
that, if needed, simply overlapping the
gray bars can seamlessly align two
adjacent images. Toggle the Show
Blending Overlap off to reactivate the
blend effect.
•
NOTE: Blending Overlap appears as
Reserved when ChristieTWIST is
installed.
Other Functions
For convenience, the Edge Blending
submenu also includes related options for
enabling a specific color and/or test pattern,
or for working with colors or the lamp. Such
functions duplicate those provided elsewhere
in the menu system.
Edge Blending Procedure
NOTES: Before attempting to work with edge blending software functions, you must
1) physically align the projectors/images by correctly overlapping the displays from
your intended external source, and 2) Match colors and Brightness Uniformity.
For a shared edge, all Blend procedures and settings
should be identical on BOTH projectors.
1. Start with two projectors. Display full white field test pattern from both.
2. In the Edge Blending submenu, enable Edge Blending by entering a checkmark in
the top checkbox.
3.
SET STARTING POINTS FOR ADJUSTMENT
•
Set all blend widths to 0.
•
Go to "More" and set everything in the Edge Blending (2) menu to 50.
Figure 3.21. Set Starting Points for Each Projector
turns your
IMPORTANT
:
013-100199-03
Table of Contents
