Navigating The Menus - Christie DLV1400-DX User Manual
Hide thumbs
Also See for DLV1400-DX:
- Instruction sheet (6 pages) ,
- Specifications (2 pages) ,
- User manual (178 pages)
Table of Contents
Section 3: Operation
3.3
Navigating the
Menus
3-10
Downloaded From projector-manual.com Christie Manuals
Lens
Shift
NOTE: Use the
key (built-in keypad) with the general
same effect as if using the arrow keys related to "Lens V" or "Lens H" on the IR
remote.
Laser
Press
to activate the laser pointer on the
remote. This feature is useful when making
presentations - just point the remote at the
screen to highlight an area of your presentation.
The closer you are to the screen the brighter the
laser beam appears. The laser pointer works best
in an environment where ambient lighting can
be controlled.
NOTE: Leave batteries in the wired remote keypad for the
Most of the controls for the projector
are accessed from within the
projector's menu system. There are
several groups of related functions,
with each group selectable from the
Main menu as shown at right. Press
at any time to display this Main
Menu
menu.
On the remote keypad, either enter
the number corresponding to the
function menu you wish to access,
such as
for the Image Settings menu, or use the
2
highlight the desired option, then press
pull-down list of further options will then appear.
With a function menu displayed, navigate in a similar manner—enter a menu option
number for any numbered option, or use the
option, then press
(Enter). Extra long menus have a scroll bar on the right—use
the arrow keys to access the remainder of the menu. Locked items or items that do not
pertain to the current action or condition appear dimmed and cannot be selected.
NOTES: 1) If there is no signal present, all source-dependent adjustments are
disabled. 2) After 15 minutes of inactivity, the projector leaves the menu system and
returns to the presentation. 3) The Status menu is read-only.
When finished with a function menu, do one of the following:
•
Press
to return to the previous screen
Exit
•
Press
to leave the menu system and return to the presentation
Menu
CAUTION
LASER RADIATION
DO NOT STARE INTO BEAM
LASER DIODE
CLASS II LASER PRODUCT
key to work.
keys on any keypad to
. The corresponding function menu or
keys to highlight the desired
keys to get the
Wavelength 670nm
Max Output 1mW
013-100199-03
Table of Contents
