Environmental Protection - Fujitsu PRIMERGY RX2510 M2 Operating Manual

Do not extend more than one unit out of the rack simultaneously even

●

if the tilt protection is in place. If several units are simultaneously

extended from the rack, there is a risk that the rack could tip over. See

the safety information of the rack and the warning label.

Only for the EMEA market:

●

The rack must be connected to the power supply by an authorized

specialist (electrician).

If the server is integrated into an installation that draws power from an

●

industrial power supply network with an IEC309 type connector, the

power supply's fuse protection must comply with the requirements for

non-industrial power supply networks for the type A connector.

4.5

Environmentally-friendly product design and development

This product has been designed in accordance with the Fujitsu standard for

"environmentally friendly product design and development". This means that

key factors such as durability, selection and labeling of materials, emissions,

packaging, ease of dismantling and recycling have been taken into account.

This saves resources and thus reduces the harm done to the environment.

Further information can be found at:

–

http://ts.fujitsu.com/products/standard_servers/index.html

–

http://jp.fujitsu.com/platform/server/primergy/concept/

market)

Energy-saving information

Devices that do not need to be constantly switched on should be switched off

until they are needed as well as during long breaks and after completion of work.

Packaging information

This packaging information doesn't apply to the Japanese market.

Do not throw away the packaging. You may need it later for transporting the

system. If possible, the equipment should only be transported in its original

packaging.

RX2510 M2

Operating Manual

Important information

(for the global market)

(for the Japanese

39