Table of Contents
System Error:
Problem Description: Error in finding the Primer home position.
Corrective Action:
System Error Codes
020000
Try the following:
D Make sure that the Service Station
Interconnect Cable (the black cable that
connects the Service Station to the Electronics
Module) is correctly connected to the
Electronics Module.
D Make sure that the cables for the Primer Stepper
Motor and Sensor are correctly connected to the
Service Station Interconnect PCA.
D Make sure that the air tubes that are connected
between the primer assembly and the service
station are in the correct position and are not
squeezed together.
D Make sure that the Primer Stepper Motor is
NOT shorted.
D Replace the Service Station interconnect cable '
Page 8 87.
D Replace the Primer Assembly ' Page 8 29.
D Replace the Service Station Assembly '
page 8 26.
D Replace the Electronics Module ' page 8 6.
Only replace one component at a time and
check if the error has gone before replacing
another component. Using this procedure
you will be able to determine exactly which
component failed.
HP DesignJet CP Series Printers
2-19
Table of Contents
Troubleshooting
