Checking The Connections Of Leads - Pioneer AVH-X8700BT Operation Manual
Dvd rds av receiver
Hide thumbs
Also See for AVH-X8700BT:
- Firmware upgrade document (5 pages) ,
- Installation manual (65 pages) ,
- Quick start manual (8 pages)
Table of Contents
Chapter
20
System settings
5
Touch the following keys in the follow-
ing order.
The "System" screen appears.
6
Touch [System Information].
7
Touch [Firmware Update].
The "Firmware Update" screen appears.
8
Touch [Continue] to display the data
transfer mode.
p Follow the on-screen instructions to finish
updating the firmware.
p This product will reset automatically after
the firmware update is completed if the up-
date is successful.
p When the firmware update starts, the
source is turned off and the Bluetooth con-
nection is disconnected.
p If an error message appears on the screen,
touch [Continue] to proceed and start the
recovery sequence.
Checking the connections
of leads
Check that the leads are properly connected
between this product and vehicle. Also check
whether they are connected in the correct po-
sitions.
1
Press the HOME button to display the
Top menu screen.
2
Touch the following keys in the follow-
ing order.
The "System" screen appears.
3
Touch [System Information].
110
Engb
4
Touch [Connection Status].
The "Connection Status" screen appears.
! Illumination
When the headlights or small lamps of the
vehicle are on, "ON" is displayed. When the
small lamps of the vehicle are off, "OFF" is
displayed. (If the orange/white lead is not
connected, "OFF" appears.)
! Vehicle Bus
When the optional Vehicle Bus adapter is
connected, "OK" is displayed. If not con-
nected, "NOK" is displayed.
- Quick Links:
- Rear View Camera
Hide quick links:
Table of Contents
