Bosch FW 100 Operating Instructions Manual page 19
Weather-compensated controller with solar control
Hide thumbs
Also See for FW 100:
- Installation and operating instructions manual (76 pages) ,
- Installation & user's instructions (84 pages)
Table of Contents
B Turn the rotary selector to highlight the
required days, e.g. Monday.
The following groups of days are available:
– All days (every day the same)
– Mon - Fri (all working days the same)
– Sat + Sun (Saturday and Sunday the same)
– Monday, Tuesday ... (every day
individually)
B Push the rotary selector.
Menu EDIT PROGRAMME A MON is
displayed; program point P1 is highlighted.
9
6
3
Fig. 12
Change program A for Monday (P1)
B Turn the rotary selector to select a different
program point, e.g. P3.
-or-
B Push the rotary selector.
The segment display and the input field for the
switching time of P1 flash.
B Turn the rotary selector to set the required
switching time, e.g. 06:30.
9
6
3
Fig. 13
Setting the switching time
B Push the rotary selector to confirm the
setting.
The segment display and the input field for the
operating mode of P1 flash.
12
15
h
18
24
21
h
6 720 617 763-10.3O
12
15
h
18
24
21
h
6 720 645 350-05.1O
Operation with flap open | 19
B Turn the rotary selector to select a different
operating mode, e.g. Economy.
9
6
3
Fig. 14
Setting the operating mode
B Push the rotary selector to confirm the
setting.
Program point P1 is highlighted.
B Turn the rotary selector to select a different
program point, e.g. P3.
-or-
B Press the menu key to exit the menu.
The controller operates with the modified
settings.
If you have changed a heating
program that was not already active
(factory setting is A:Programme A),
select the relevant heating program
in menu HEATING together with
menu point Activate and activate it
(
Chapter 5.4.1).
12
15
h
18
21
24
h
6 720 645 348-04.1O
6 720 645 350 (2010/09)
Hide quick links:
Table of Contents
