Symbols On Equipment; Rack Warnings - HP ProLiant DL320 Maintenance And Service Manual
Generation 2
Hide thumbs
Also See for ProLiant DL320:
- Setup and installation manual (139 pages) ,
- User manual (119 pages) ,
- Quickspecs (43 pages)
Table of Contents
Removal and Replacement Procedures
Symbols on Equipment
CLASS 1 LASER PRODUCT
Rack Warnings
2-2
HP CONFIDENTIAL Codename: Moonstar 266 Part Number: 293164-002 Last Saved On: 4/14/03 9:37 AM
Any surface or area of the equipment marked with these symbols indicates the
presence of a hot surface or hot component.
WARNING: To reduce the risk of injury from a hot component, allow the surface to cool
before touching it.
To reduce the risk of injury from electric shock hazards, do not open this enclosure.
WARNING: Any surface or area of the equipment marked with these symbols indicates
the presence of electric shock hazards. The enclosed area contains no
operator-serviceable parts.
This symbol indicates the presence of electric shock hazards. The enclosed area
contains no user or field-serviceable parts. Do not open for any reason.
WARNING: To reduce the risk of injury from electric shock hazards, do not open this
enclosure.
Any RJ-45 receptacle marked with these symbols indicates a network interface
connection.
WARNING: To reduce the risk of electric shock, fire, or damage to the equipment, do
not plug telephone or telecommunications connectors into this receptacle.
This label or equivalent is located on the surface of the CD-ROM or DVD-ROM
drive. This label indicates that the product is classified as a Class 1 Laser Product.
WARNING: To reduce the risk of personal injury or damage to equipment, always
ensure that the rack is adequately stabilized before extending a component outside the
rack. A rack may become unstable if more than one component is extended for any
reason. Extend only one component at a time.
WARNING: To reduce the risk of personal injury or damage to the equipment, be sure
that:
•
The leveling jacks are extended to the floor.
•
The full weight of the rack rests on the leveling jacks.
•
The stabilizers are attached to the rack, if it is a single rack installation.
•
The racks are coupled together in multiple rack installations.
WARNING: When installing the server in a telco rack, make certain that the rack frame
is adequately secured to the building structure at the top and bottom.
HP ProLiant DL320 Generation 2 Server Maintenance and Service Guide
Table of Contents
