Show Trace - Dell Z9500 Reference Manual

Hide thumbs Also See for Z9500:
Table of Contents

show trace

View results of trace operations on the switch or a specified lien card.
Z9500
Syntax
show trace [linecard slot-id | rp]
Parameters
linecard slot-id
rp
Command
EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
Example
Dell#show trace linecard 2
[9/3 5:18:18] SYS-(tUsrRoot):Spawn TCL Server.
[9/3 5:18:18] SYS-(tUsrRoot):After lpSysInit().
[9/3 5:18:18] SYS-(tUsrRoot):No LONG tick flag defined.
[9/3 5:18:18] SYS-(tUsrRoot):No ULONG tick flag defined.
[9/3 5:18:18] SYS-(tUsrRoot):++TICK_COUNT = 0x0 int: 4, LONG:
4,
[9/3 5:18:33] SYS-(tUsrRoot):Port Pipe Driver Initialized.
Result == ERROR.
[9/3 5:18:33] SYS-(tUsrRoot):Port Pipe Driver prior to Init.
Result == ERROR.
[9/3 5:18:33] SYS-(tUsrRoot):Binding L2 Loop Back Protocol to
ENDs.
[9/3 5:18:33] SYS-(tUsrRoot):After HWInit().
[9/3 5:18:33] TME-(tme):Var pools for SYS_PART_ID is
initialized
[9/3 5:18:33] TME-(tme):
<<[tme - tme_task2IpBind] - IP Address
svce 13 - inst 5>>
[9/3 5:18:33] TME-(tme):f10TaskCreate: spawned ipc svc(14)
inst(5) p_cpid(8)
[9/3 5:18:33] TME-(ipc):f10TaskStartup: svc(14) inst(5)
parentSvc(13) parentInst(5) taskIdx(1812): tskSvc(14)
tskInst(5) p_cpid(8) p_procId(302) p_pstate(0x2000d)
162
Enter the slot ID of the line card for which you want to
collect information for tech support. The range of Z9500 slot
IDs is from 0 to 2.
Enter the keyword rp to collect information about the Route
Processor for tech support.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added:0x7f0a0a21 -
Control and Monitoring
Table of Contents
loading

Table of Contents