Debug Ip Bgp Keepalives - Dell Z9500 Command Reference Manual
Hide thumbs
Also See for Z9500:
- Reference manual (1849 pages) ,
- Configuration manual (953 pages) ,
- Installation manual (47 pages)
Table of Contents
Version
7.4.1.0
debug ip bgp keepalives
Allows you to view information about BGP keepalive messages.
Z9500
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name]
keepalives [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name] keepalives [in | out] command.
Parameters
ipv6-address
peer-group
peer-group-
name
in
out
Command
EXEC Privilege
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Usage
Enter the no debug ip bgp command to remove all configured debug
Information
commands for BGP.
528
Description
Introduced
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
followed by the prefix length in the /x format. The range is /0
to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
(OPTIONAL) Enter the keywords peer-group followed by
the name of the peer group.
(OPTIONAL) Enter the keyword in to view only information
on inbound keepalive routes.
(OPTIONAL) Enter the keyword out to view only information
on outbound keepalive routes.
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Border Gateway Protocol
Table of Contents
