Table of Contents
Quick Links
Table of Contents
Related Manuals for Black & Decker GK1935T-XE
Summary of Contents for Black & Decker GK1935T-XE
- Page 1 GK1935T-XE GK2235T-XE GK1940T-XE Australia GK2240T-XE New Zealand...
-
Page 5: Intended Use
(Original instructions) ENGLISH Intended use 3. Personal safety Your Black & Decker chainsaw has been designed for pruning a. Stay alert, watch what you are doing and use common and felling trees and cutting logs. This tool is intended for sense when operating a power tool. - Page 6 (Original instructions) ENGLISH f. Keep cutting tools sharp and clean. Properly Use extreme caution when cutting brush and maintained cutting tools with sharp cutting edges are less saplings. The slender material may catch the saw likely to bind and are easier to control. chain and be whipped toward you or pull you off g.
-
Page 7: Voltage Drops
(Original instructions) ENGLISH Do not overreach and do not cut above shoulder Vibration height. This helps prevent unintended tip contact and The declared vibration emission values stated in the technical enables better control of the chainsaw in unexpected data and the declaration of conformity have been measured in situations. -
Page 8: Additional Safety Instructions
(Original instructions) ENGLISH Guard against electric shock Wear safety glasses or goggles when operating this Prevent body contact with earthed or grounded surfaces tool. (e.g. metal railings, lamp-posts etc.). Electric safety can be further improved by using a high-sensitivity (30 mA/ Always wear ear protection. - Page 9 (Original instructions) ENGLISH Lightly pull on the chain (6) as shown (inset fig. I). The Oiling the chain tension is correct when the chain (6) snaps back after You must do this whenever you use a new chain (6) for the being pulled 3 mm away from the guide bar (7).
- Page 10 (Original instructions) ENGLISH Pre-plan a safe exit from falling trees or branches. Make sure How the anti-kickback chain brake works In the event of kickback, your left hand comes in contact with that the exit route is clear of obstacles that would prevent or the front guard, pushing it forwards, toward the workpiece, hinder movement.
-
Page 11: Troubleshooting
(Original instructions) ENGLISH When supported at both ends: Problem Possible cause Possible First, cut one third down to avoid splintering and second, solution cut again to meet the first cut. Bar/chain appear Oil tank empty Check oil tank hot/smoking level When supported at one end: First cut one third up to avoid splintering and second, cut Oil hole blocked... -
Page 12: Protecting The Environment
Internet at: www.2helpU.com parts. Saw chain sharpness Technical data GK1935T-XE GK2235T-XE The saw chain cutters will blunt immediately if they touch the Typ. 3 Typ. 3 ground or a nail while cutting. - Page 13 (Original instructions) ENGLISH Level of sound pressure according to EN 60745: Sound pressure (L ) 94 dB(A), uncertainty (K) 3 dB(A) Sound power (L ) 105 dB(A), uncertainty (K) 3 dB(A) Vibration total values (triax vector sum) according to EN 60745: Vibration emission value (a ) 5 m/s , uncertainty (K) 1.5 m/s...
- Page 16 Australia Stanley Black & Decker Tel. 1800 338 002 82 Taryn Drive, Epping Vic, 3076, Australia New Zealand Stanley Black & Decker Tel. +0800 339 258 90598947 06/2013...