Asus RP-AC56 Quick Start Manual

RP-AC56

Wireless-AC1200 Range Extender

Q10397

First Edition

April 2015

Method One

Quick Setup with WPS (Wi-Fi Protected Setup)

For router/Access Point(AP) with WPS support

1

Power On

Place your RP-AC56 near your router/AP and plug it

to a power outlet.

Wait until the power LED

turns solid green.

3

Place in an ideal location

After placing your RP-AC56 in an ideal location, RP-AC56 connects to your router/AP in about one (1) minute.

NOTES:

•

Place your RP-AC56 between your router/AP

and wireless device to get the best extender

performance.

•

Place your RP-AC56 in a location where you can

get green or orange Wi-Fi LED.

IMPORTANT!

•

To minimize interference, keep RP-AC56 away from devices like cordless phones, Bluetooth devices and microwave ovens.

•

We recommend that you place your RP-AC56 in open or spacious location.

Q1: What should I do if my router does not support WPS?

A1: You can use Method Two to set up RP-AC56.

Q2: Why is that the Wi-Fi LED does not light up after completing Method

Two?

A2: You may have entered the wrong router SSID and password. Reset your RP-AC56,

double check your router SSID/password, and set up RP-AC56 again.

Q10397_RP-AC56_QSG_Special.indd 1

2

Connect via WPS (Wi-Fi Protected Setup)

1. Press the WPS button on your

Router/AP.

NOTE: Ensure that your router/AP supports WPS. Otherwise, use Method TWO.

Frequently Asked Questions (FAQ)

Q3: Why is it that I cannot see the login page after entering

http://repeater.asus.com in the browser?

A3: Ensure that your computer is connected to the extender network only,

and set your computer to Obtain an IP address automatically.

Q4: How do I reset RP-AC56?

A4: Press the RESET button on the front cover of RP-AC56 for about two (2)

1. Power LED

On: RP-AC56 is on

2. 5 GHz Wi-Fi LED

Green: RP-AC56 provides excellent Wi-Fi

extender performance.

Orange: RP-AC56 provides acceptable Wi-Fi

extender performance.

Red: RP-AC56 provides poor Wi-Fi extender

performance.

: RP-AC56 is not connected to a router/AP.

3. 2.4 GHz LED

Green: RP-AC56 provides excellent extender

performance.

Orange: RP-AC56 provides acceptable Wi-Fi

extender performance.

Red: RP-AC56 provides poor Wi-Fi extender

performance.

: RP-AC56 is not connected to a router/AP.

2. Press the WPS button on your RP-AC56 for

more than two (2) seconds until the LEDs

start to blink.

Enjoy!

Your RP-AC56's wireless network name (SSID) chang-

es to your existing Wi-Fi network name, ending with

_RPT or _RPT5G and shares your router/AP's Wireless

Password.

about two (2) minutes and

then turns solid green. The

color of the LED indicates

the Wi-Fi signal strength.

2015/6/10 17:31:34