Installation; Led Indications - NEC Univerge SV9100 Hardware Manual
Hide thumbs
Also See for Univerge SV9100:
- Features and specifications (1403 pages) ,
- Programming manual (954 pages) ,
- Manual (766 pages)
Table of Contents
Issue 1.2
LED Indication
Live LED
Busy LED
(Green)
(Red)
On
On
Flash (1s)
On
Flash (1s)
On
Flash
(100ms)
Off
4 - 42
4.3.2
Installation
Install the GCD-4LCA
slot.
If the GPZ-4LCA/GPZ-8LCE is used, install this prior to inserting the
.
GCD-8LCA into the chassis
4.3.3
LED Indications
LED indications for the GCD-4LCA
20 GCD-4LCA/GCD-8LCA LED
its associated function and LED and Operational status. Refer to
Figure 4-11 GCD-4LCA/GCD-8LCA Blade on page 4-40
location of the LEDs on the blades.
Table 4-20 GCD-4LCA/GCD-8LCA LED Indications
Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
When connecting a fax machine or analog
modem, make sure to set Program 15-03-03 to
1 (special terminal) to avoid communication
problems.
The SLIU and SLIDB are categorized as
TNV2. With this designation, off-premise
wiring is not acceptable. Any cabling to the
SLIU blade must be within the building – no
outside cabling is permitted.
Branch connection is not acceptable.
/
GCD-8LCA blade into any available universal
GCD-8LCA are listed in
/
Indications. Each LED is listed with
UNIVERGE SV9100
for the
Remarks
–
When you exceed the system
capacity.
When the main software
version is not matched.
–
–
–
Installing the SV9100 Blades
Table 4-
- Quick Links:
- Power Requirements
Hide quick links:
Table of Contents
