Child Lock Function; Forced Operation - LG AMNW07GDBL1 Service Manual

Part 2 Functions & Controls

It is the function to use preventing children or others from careless using.

FAN

SPEED

TEMP

• To operate the appliance by force in case when the remote control is lost, the forced operation selection switch is on

the main unit of the appliance, and operate the appliance in the standard conditions.

• The operating condition is set according to the outdoor temp. and intake air temperature as follows.

Indoor temp.

over 24°C

21~24°C

below 21°C

• The unit select the last operation mode in 3 hours.

• Operating procedures when the remote control can't be used is as follows :

- The operation will be started if the ON/OFF button is pressed.

- If you want to stop operation, re-press the button.

Copyright ©2014 LG Electronics. Inc. All right reserved.

Only for training and service purposes

During the operation, when pressing the

1

button for approx. 3 seconds, the 'Child Lock' Function can

be used.

- At the time of initial setting of the 'Child Lock', the 'CL' Will

If the 'CL' function is wanted to be used under the operation

2

standby state, press the

3 seconds under the standby mode state and the system will

OPER

be the 'CL' state.

MODE

As for the releasing method, when pressing the

3

released.

Operating Mode

Cooling

Healthy Dehumidification

Heating

be indicated approx. 3 seconds at the temperature Display

section before resuming to the previous mode.

After the setting of the 'CL', if another button is setup, the

button can not be recognized as the 'CL' is indicated at the

temperature display section for approx. 3 seconds.

FAN

button and

Button for approx.

SPEED

FAN

button for approx. 3 seconds, the 'CL' function can be

SPEED

- 22 -

button and

Button and

Setting speed of

Setting temp.

indoor fan

22°C

High speed

23°C

24°C

LGE Internal Use Only

FAN

SPEED