Common User Commands; Programming The Inactivity Operation; Setting Autopan Mode; Setting Preset Shots - Bosch MIC550 User Manual
Hide thumbs
Also See for MIC550:
- User manual (66 pages) ,
- Installation and user manual (54 pages) ,
- Installation manual (8 pages)
Table of Contents
58
en | Common User Commands
15
Common User Commands
This chapter details common user commands. See Keyboard Commands (Bosch Protocol) By
Number, page 69 for a complete list of commands.
15.1
Programming the Inactivity Operation
You can program the MIC camera to change its operating mode automatically after a period of
inactivity.
15.2
Setting AutoPan Mode
AutoPan mode pans the MIC camera 360º or pans between user-defined limits (when
programmed). The MIC camera continues to pan until stopped by moving the joystick.
To pan 360º:
1.
2.
To set left and right pan limits:
1.
2.
To start AutoPan between limits:
1.
2.
15.3
Setting Preset Shots
Preset shots are saved camera positions. Shots are saved as scenes, therefore, the terms
SHOT and SCENE are used interchangeably.
To set a Shot:
1.
2.
3.
To view a Shot:
4
To store or clear a Shot:
1.
2.
To disable overwrite confirmations:
If you overwrite a preset shot, the MIC camera issues a confirmation message prompting you
to approve the overwrite. To disable this confirmation message, press OFF-89-ENTER.
15.4
Specifying a Shot or a Sector Title
The MIC camera provides an alphanumeric character palette used to specify a title for a shot
(scene) or for a sector (zone).
To specify a title:
1.
2.
3.
4.
November 2011 | | F.01U.239.454
Press ON-1-ENTER.
Move the joystick to stop the pan.
Move the camera to the starting position and press SET-101-ENTER to set the left limit.
Move the camera to the end position and press SET-102-ENTER to set the right limit.
Press ON-2-ENTER.
Move the joystick to stop the pan.
Move the camera to the position you want to save.
Press SET-#-ENTER, where # can be a number from 1 to 99 that identifies the camera
position of the scene.
To specify a title for the shot, see the procedure below.
Press SHOT-#-ENTER, where # is the number of the scene position that you want to view.
Press SET-100-ENTER to access the Store/Clear Scene Menu.
Follow the on-screen instructions.
Navigate to the shot or scene:
–
for a shot: set a new shot or view a stored shot, then press ON-62-ENTER.
–
for a scene: move the MIC-550 to the scene (zone), then press ON-63-ENTER.
Use the joystick to move the cursor to highlight a character.
Press Focus/Iris to select the character.
Continue to select characters (up to 20) until you have created the title.
Operation Manual
MIC Series 550
Bosch Security Systems, Inc.
Hide quick links:
Table of Contents
