Related Manuals for Fujitsu SCALEOVIEW Q26W-1
Summary of Contents for Fujitsu SCALEOVIEW Q26W-1
- Page 1 Professional Monitor English Operating Manual SCALEOVIEW Q26W-1 Downloaded from ManualMonitor.com Manuals...
- Page 2 Are there ..any technical problems or other questions that you would like help with? Please contact: • our Hotline/Help Desk (refer to the enclosed Help Desk List or go to: "www.fujitsu-siemens.com/support/") • your sales partner • your sales office The latest information on our products, tips, updates etc.
- Page 3 Downloaded from ManualMonitor.com Manuals...
- Page 4 This manual was produced byXerox Global Services Published by Fujitsu Siemens Computers GmbH AG12/07 Edition1 Order no.: A26361-K1214-Z120-1-7619 Downloaded from ManualMonitor.com Manuals...
-
Page 5: Table Of Contents
SCALEOVIEW Q26W-1 Operating Manual Your LCD screen... Important notes Getting started Operation Notes on ergonomic colour adjustment Troubleshooting Notes regarding the DIN EN ISO 13406-2 standard Technical data Downloaded from ManualMonitor.com Manuals... - Page 6 VESA, DDC and DPMS are registered trademarks of Video Electronics Standards Association. Copyright © Fujitsu Siemens Computers GmbH2007 All rights reserved, including in particular rights of translation, reproduction by printing, copying or similar methods, in part or in whole. Non-compliance is subject to compensation for damages.
- Page 7 Contents Contents Your LCD screen............... . Target group .
- Page 8 Contents A26361-K1214-Z120-1-7619, edition 1 Downloaded from ManualMonitor.com Manuals...
-
Page 9: Your Lcd Screen
Your LCD screen... Your LCD screen... has a whole range of useful features and functions, e.g.: • TFT display (Thin Film Transistor; active matrix) • minimal space requirements thanks to slim casing • optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour purity right into the corners) •... -
Page 10: Further Information
• cross-references to an external source, e.g. a web address: For more information, go to "www.fujitsu-siemens.com" • indicates names of CDs and DVDs as well as names and titles of other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety" manual refers to a key on the keyboard, e.g.:... -
Page 11: Important Notes
Important notes Important notes Importantnotes Notes In this chapter you will find information regarding safety which it is essential to take note of when working with your device. A26361-K1214-Z120-1-7619, edition 1 Downloaded from ManualMonitor.com Manuals... -
Page 12: Safety Instructions
Important notes Safety instructions This device complies with the relevant safety regulations for data processing equipment, including electronic office machines for use in an office environment. If you have any questions, contact your sales outlet or our Help Desk. • The display surface of the device is sensitive to pressure and scratches. -
Page 13: Power Cable
Important notes Power cable Use the supplied power cable only. Use the following guidelines if it is necessary to replace the original cable set. • The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirements. • The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the outer sheath. -
Page 14: Energy Star
These savings could also prevent the emission of 20 million tons of carbon dioxide into the atmosphere - the equivalent of 5 million automobiles. As an Energy Star Partner, Fujitsu Siemens Computers GmbH has determined that this product meets the Energy Star guidelines for energy efficiency. -
Page 15: Disposal And Recycling
Protection Administration Inc.1250E. Arques Executive Yuan R.O.C. Avenue Sunnyvale, CA "http://recycle.epa.gov.tw" 94085 U.S.A.Contact: Schroettle-Henning, Bernd Phone No.: (408) 834-0306 Fax No.: (408) 746-8299 For more information on this subject, please go to "www.fujitsu-siemens.com/recycling". A26361-K1214-Z120-1-7619, edition 1 Downloaded from ManualMonitor.com Manuals... -
Page 16: Getting Started
Getting started Getting started Unpacking and checking the delivery The display surface of the device is sensitive to pressure and scratches. Always hold the device by the casing! The complete device package includes: • one monitor • one data cable (D-SUB) •... -
Page 17: Setting Up An Ergonomic Video Workstation
Getting started Setting up an ergonomic video workstation ► Do not position the video workstation opposite a window (1). ► Position the monitor outside the reach of a light source (1). ► Position the keyboard where it is easiest to reach (1). A26361-K1214-Z120-1-7619, edition 1 Downloaded from ManualMonitor.com Manuals... -
Page 18: Adjusting The Inclination
Getting started ► Position the monitor so that the eye distance to the screen (1) is around 50 cm. 50 cm ► Position the monitor for optimum viewing (1). The monitor should under no circumstances fall outside the permissible viewing space (2). Depending on the situation, it may be advisable to use a swivel arm or wall bracket (VESA FPMPMI), which are available from specialist dealers. -
Page 19: Removing Monitor Base
Getting started Removing monitor base Before you can use a swivel arm or a wall bracket, you must remove the monitor base. The display surface is susceptible to scratching! ► Switch off the monitor and pull the power plug out of the power socket. ►... -
Page 20: Connecting The Device
Getting started ► To remove the monitor base, undo the screws on the monitor base (3). You can now mount a swivel arm or a wall bracket in accordance with VESA FPMPMI using a hole spacing of 100 mm. For instructions on how to mount the swivel arm or wall bracket, please see the documentation for the swivel arm or wall bracket. -
Page 21: Connecting Cables To The Monitor
Getting started Connecting cables to the monitor The monitor ports are protected by a cover. The supplied data cables have two 15-pin D-SUB connectors or two 24-pin DVI connectors and a 19-pin HDMI-connector for connection to the monitor and to the computer. Information on the computer connections and interfaces is contained in the operating manual for the computer. - Page 22 Getting started ► Remove the cover (2). ► Select the appropriate data cable for your computer. 16 17 3 = Power socket 14 = VIDEO CVBS 4 = Digital (DVI) 15 = AUDIO R (AUDIO IN) 5 = HDMI socket 16 = AUDIO L (AUDIO IN) 6 = Analogue (VGA) 17 = PC AUDIO IN...
-
Page 23: Connecting Cables To The Computer
Getting started Connecting cables to the computer Information on the computer connections and interfaces is contained in the operating manual for your computer. ► Connect the data cable to the (active) monitor port on the computer and secure the plug-in connection by tightening the safety screws. ►... -
Page 24: Operation
Operation Operation Switching the device on and off The ON/OFF switch (2) on the front of the monitor is used for switching the monitor on and off. Press the buttons from the bottom up. The colour of the LED indicator changes as follows: LED indicator Status blue... -
Page 25: Notes On Power Management
Operation Notes on power management If your computer is equipped with power management, the monitor can support this function fully. The monitor does not distinguish between the individual power management modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of immediately switching into the mode with the highest energy-saving effect. -
Page 26: Changing The Monitor Settings With The Buttons Of The Control Panel
Operation Changing the monitor settings with the buttons of the control panel The buttons of the control panel have two functions. With the OSD menu not activated, you can make the following settings directly: MODE 1 = SELECT / MENU button 5 = Back / INPUT button 2 = Forward / Mute button 6 = EXIT / AUTO button... -
Page 27: Locking The Osd Menu
Operation Locking the OSD menu The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings. ► Press and hold the SELECT/MENU button for a few seconds while you switch on the monitor with the ON/OFF switch. The Action was executed message appears. -
Page 28: Changing The Monitor Settings Using The Osd Menu
Operation Activating PIP mode The PIP button allows you to call up two different screen displays. ► Press the button once. The OSD menu and the PIP window are Quell-Bild displayed on the main display. ► Press the button twice in succession. The screen is divided into the main video Quell-Bild PIP- Bild... - Page 29 Operation ► Press the button to SELECT / MENU activate the OSD menu. The main menu appears with icons for the setting functions. The first icon (Brightness/Contrast) is highlighted and the associated functions are displayed in the right-hand menu field. ►...
- Page 30 Operation Changing the PIP settings in the OSD menu ► Press the SELECT/MENU button to activate the selected function. ► Press the Forward / Mute button or the Back INPUT button to highlight the PIP display. ► Press the SELECT / MENU button to select the highlighted icon.
-
Page 31: Osd Menu Functions
Operation Possible combinations of signal sources Depending on which source the signal for the main display comes from, you can use certain sources for the signal of the PIP display. Signal sources Main display PIP display CVBS YPbPr DVI/ HDMI CVBS YPbPr DVI/HDMI... -
Page 32: Selecting The Application Mode
Operation Selecting the application mode Call up the Mode setting window Office Office presets (the settings for colour and sharpness can be adjusted) Photo Photo presets (colour, sharpness, saturation) Video Video presets (colour, sharpness, saturation) Game Game presets (colour, sharpness, saturation) Adjusting the picture size and position Call the Image adjust setting window Phase... -
Page 33: Setting Colour Temperature And Colours
Operation Setting colour temperature and colours Call the Colour setting window Select the colour temperature The "warmth" of the screen colours is set using the colour temperature. The colour temperature is measured in K (= Kelvin). You can choose between sRGB, 6500 K, 9300 K, Native and Custom Colour. -
Page 34: Setting Functions
Operation Setting functions Call up the Setup settings window Input select Select the input signal This function is used to select the input signal (VGA, DVI, HDMI, CVBS, S-Video or YPbPr). This is on condition that the display adapter supports this function. Language Set the language for the OSD menu With this function you select the language for the OSD menu. -
Page 35: Notes On Ergonomic Colour Adjustment
Notes on ergonomic colour adjustment Notes on ergonomic colour adjustment If you select colours for the monitor in your application programmes, take note of the information below. The primary colours blue and red on a dark background do not produce the minimum required contrast of 3:1 and are therefore not suitable for continuous text and data entry. -
Page 36: Troubleshooting
Troubleshooting Troubleshooting Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the problem, please inform our help desk. Having this problem? Check the following points: No screen display... - Page 37 Troubleshooting Having this problem? Check the following points: Picture disturbances (vertical lines) ► Press the EXIT / AUTO button to perform auto-adjustment of the screen. Picture disturbances (horizontal lines, picture ► Press the button to perform EXIT / AUTO noise) auto-adjustment of the screen.
-
Page 38: Notes Regarding The Din En Iso 13406-2 Standard
Notes regarding the DIN EN ISO 13406-2 standard Notes regarding the DIN EN ISO 13406-2 standard Permanently unlit or lit pixels The standard of production techniques today cannot guarantee an absolutely fault-free screen display. A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum permitted number of pixels faults is stipulated in the international standard ISO 13406-2 (Class II). -
Page 39: Technical Data
Technical data Technical data Condensation is not permissible either in the rated range of operation or in the limit range of operation. Q26W-1 Dimensions and weight Visible diagonals 66 cm Dot pitch 0.287 mm Image size Width 550 mm Height 343.8 mm Maximum resolution 1920 x 1200... -
Page 40: Vesa-Ddc-Compatible Vga Interface
Technical data VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the computer. If the computer is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum operation from the monitor and select the appropriate settings. -
Page 41: Sub D Port
Technical data SUB D port Meaning Video input red Video input green Video input blue Ground Ground Video ground red Video ground green Video ground blue +5 V (DDC) Sync. ground Ground DDC Data H. sync V. sync DDC Clock A26361-K1214-Z120-1-7619, edition 1 Downloaded from ManualMonitor.com Manuals... -
Page 42: Dvi-D Port
Technical data DVI-D port Meaning TMDS Data2– TMDS Data2+ TMDS Data 2/4 Shield not connected not connected DDC Clock DDC Data Analog Vertical Sync TMDS Data1– TMDS Data1+ TMDS Data 1/3 Shield not connected not connected +5V Power Ground Hot Plug Detect TMDS Data0–... -
Page 43: Hdmi Port
Technical data HDMI port Meaning TMDS Data2+ TMDS Data2 Shield TMDS Data2– TMDS Data1+ TMDS Data1 Shield TMDS Data1– TMDS Data0+ TMDS Data0 Shield TMDS Data0– TMDS Clock+ TMDS Clock Shield TMDS Clock– N.C. DDC/CEC Ground +5 V Power Hot plug detect A26361-K1214-Z120-1-7619, edition 1 Downloaded from ManualMonitor.com Manuals... -
Page 44: S-Video Port
Technical data S-Video port Meaning Luminance (Y) Chrominance (C) A26361-K1214-Z120-1-7619, edition 1 Downloaded from ManualMonitor.com Manuals...