Table of Contents
Table of Contents
Related Manuals for Fujitsu B22T-7 LED proGREEN
Summary of Contents for Fujitsu B22T-7 LED proGREEN
- Page 1 Display Operating Manual B22T-7 LED proGREEN B24T-7 LED proGREEN...
- Page 2 For driver updates, go to: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
- Page 4 Published by Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 (Mies-van-der-Rohe Street No. 8) 80807 Munich, Germany Contact http://www.fujitsu.com/fts/ Copyright © Fujitsu Technology Solutions GmbH 2012. All rights reserved. Publication Date 11/2012 Order No.: A26361-K1453-Z320-1-7619, edition 1...
-
Page 5: Table Of Contents
B22T-7 LED proGREEN B24T-7 LED proGREEN Operating Manual Your LCD screen... Important notes Getting started Operation Notes on ergonomic colour adjustment Troubleshooting Explanatory information about standard ISO 9241-307 Technical specification... - Page 6 Remarks Notes on the product description meet the design requirements of Fujitsu and are provided for the purposes of comparison. The actual results may differ due to several factors. Subject to technical changes without prior notification. Fujitsu accepts no responsibility for technical or editorial mistakes or omissions.
- Page 7 Contents Contents Your LCD screen............... . Target group .
- Page 8 Contents...
-
Page 9: Your Lcd Screen
Your LCD screen... Your LCD screen... has a whole range of useful features and functions, e.g.: • TFT display (Thin Film Transistor; active matrix) • minimal space requirements thanks to slim casing • optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour purity right into the corners) •... -
Page 10: Further Information
"Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations of other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety" Manual indicates a button on the monitor, e.g:... -
Page 11: Important Notes
Important notes Important notes Importantnotes Notes In this chapter you will find information regarding safety which it is essential to take note of when working with your device. Safety instructions This device complies with the relevant safety regulations for data processing equipment, including electronic office machines for use in an office environment. -
Page 12: Power Cable
Important notes • The device must only be operated in landscape mode (0°) and portrait mode (90°). The control buttons are located in the middle of the bottom of the monitor in landscape mode (0°) and at the left-hand side of the monitor in portrait mode (90°). •... -
Page 13: Cleaning The Device
Important notes Cleaning the device Switch off the device and unplug the power plug. Do not clean any interior parts yourself, leave this job to a service technician. Do not use any cleaning agents that contain abrasives or may corrode plastic. Ensure that no liquid enters the device. -
Page 14: Disposal And Recycling
"http://fujitsu.com/fts/remarketing" "http://www.recupel.be" "http://www.swico.ch" Asia Taiwan: Fujitsu America, Inc. Environmental Protection 1250E. Arques Avenue Administration Sunnyvale, CA 94085 U.S.A. Executive Yuan R.O.C. Phone No.: (408) 746-6000 "http://recycle.epa.gov.tw" More information on this subject can be found on the Internet at "http://fujitsu.com/fts/recycling". -
Page 15: Getting Started
Getting started Getting started Unpacking and checking the delivery The display surface of the device is sensitive to pressure and scratches. Always hold the device by the casing! The complete device package includes: • one monitor • one data cable (DVI) •... -
Page 16: Setting Up The Device
Getting started Setting up the device To ensure sufficient ventilation, the air inlet and outlet openings of the device must be kept clear. Setting up an ergonomic video workstation ► Do not position the video workstation opposite a window (1). ►... - Page 17 Getting started ► Position the keyboard where it is easiest to reach (1). ► Position the monitor so that the eye distance to the screen (1) is around 50 cm. 50 cm ► Position the monitor for optimum viewing (1). The monitor should under no circumstances fall outside the permissible viewing space (2).
-
Page 18: Mounting The Monitor Base
Getting started Mounting the monitor base Do not remove the retaining splint before you have secured the base plate on the monitor and have brought it into operating position. ► Insert the base plate on the foot (1). ► Guide the screw through the opening (2). ►... -
Page 19: Adjusting Height
Getting started Adjusting height The height adjustment is fixed in the transport position. ► To free the fixing, remove the locking pin on the flange (1). The height of the monitor can be adjusted by approximately 130 mm. ► Grasp the monitor with both hands on the right and left edge of the casing and move it up or down (2). -
Page 20: Removing Monitor Base
Getting started Removing monitor base Before you can use a swivel arm or a similar accessory, you must remove the monitor base. The display surface is susceptible to scratching! ► Switch off the monitor and pull the power plug out of the power socket. ►... -
Page 21: Connecting The Device
Getting started Connecting the device Please observe the safety information in "Important notes", Page CE conformance and optimum picture quality are guaranteed only if you use the data cables supplied. ► Switch off the monitor and the computer. ► Disconnect the power plug from the computer. Connecting cables to the monitor The data cables supplied have two 15-pin D-SUB connectors or two 24-pin DVI connectors for connection to the monitor and to the computer. -
Page 22: Connecting Cables To The Computer
Getting started ► Connect one of the connectors of the data cable to the D-SUB socket or the DVI-D socket or the HDMI socket of the monitor and secure the plug connection by tightening the retaining screws. The monitor automatically detects the input when only one signal source is connected. ►... -
Page 23: Operation
Operation Operation Switching the device on and off 1 = Switch On/Off 2 = Power supply indicator The colour of the LED indicator changes as follows: LED indicator Status blue Monitor and computer are switched on (normal mode). green Monitor and computer are switched on (ECO mode). orange Monitor is not receiving a video signal or is in power saving mode. -
Page 24: Notes On Power Management
Operation Notes on power management If your computer is equipped with power management (power-saving mode), the monitor can fully support this function. Here the monitor does not distinguish between the individual energy-saving modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of immediately switching into the mode with the highest energy-saving effect. -
Page 25: Changing The Monitor Settings
Operation Changing the monitor settings When putting the monitor into operation for the first time, the screen display should be optimally adapted to the display adapter used. Changing the monitor settings with the buttons of the control panel The buttons of the control panel have two functions. If the OSD menu is activated, a description of the current function of the buttons is displayed directly above the buttons at the edge of the screen. -
Page 26: Locking The Osd Menu
Operation Select OSD language If one of the buttons is being pressed for the first time for the OSD menu, the selection screen for the language is displayed: ► Press the or the INPUT button to select the required language. ►... -
Page 27: Activate/Deactivate Eco Operating Mode
Operation Activate/deactivate ECO operating mode The power consumption of the device can be decreased by reducing the brightness of the picture. ► Press the button to switch the ECO operating mode on or off. The message ECO Mode ein or ECO Mode off appears. If the ECO operating mode is activated, the following OSD settings are changed: 6,500 K Colour... -
Page 28: Changing The Monitor Settings Using The Osd Menu
Operation Changing the monitor settings using the OSD menu With the buttons on the control panel, you can call up and use the integrated OSD (On-Screen Display) menu. The English menu names are used in the following description (default setting). ►... -
Page 29: Osd Menu Functions
Operation ► Press the button or the button to highlight another function. INPUT ► Press the MODE button or the button to change the setting. ► Press the button or the INPUT button to highlight another function. ► Press the MENU button to save the change or press the AUTO... -
Page 30: Adjusting The Brightness And Contrast
Operation Adjusting the brightness and contrast Call up the Brightness/Contrast setting window Set the brightness of the display Brightness With this function you change the brightness of the background lighting. Set the contrast of the display Contrast With this function you modify the contrast of bright colour tones. Set the brightness of the display Black level With this function you modify the contrast of dark colour tones. -
Page 31: Setting Colour Temperature And Colours
Operation Setting colour temperature and colours Call the Colour setting window Select the colour temperature The "warmth" of the screen colours is set using the colour temperature. The colour temperature is measured in K (= Kelvin). You can choose between sRGB, 6500 K, 7500 K, 9300 K, Native and Custom Colour. -
Page 32: Displaying Information
Operation Setting functions in the Advanced menu Call up the Advanced setting window Selecting the input signal Input select This function allows you to switch the monitor from analogue to digital mode and vice versa, when several signal sources are connected. This requires that the graphic card used supports this function. -
Page 33: Notes On Ergonomic Colour Adjustment
Notes on ergonomic colour adjustment Notes on ergonomic colour adjustment If you select colours for the monitor in your application programmes, take note of the information below. The primary colours blue and red on a dark background do not produce the minimum required contrast of 3:1 and are therefore not suitable for continuous text and data entry. -
Page 34: Troubleshooting
Troubleshooting Troubleshooting Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you cannot solve the problem, please contact our Service Desk. Having this problem? Check the following points: No screen display ►... - Page 35 Troubleshooting Having this problem? Check the following points: ► Press the button to conduct the Picture disturbances (vertical lines) AUTO auto-adjustment of the screen. Picture disturbances (horizontal lines, picture ► Press the AUTO button to conduct the noise) auto-adjustment of the screen. The screen becomes darker The background lighting has a limited lifetime.
-
Page 36: Explanatory Information About Standard Iso 9241-307
The maximum permitted number of faulty pixels is stipulated in the international standard ISO 9241-307. In accordance with standard ISO 9241-3, LCD monitors by Fujitsu comply with Class II for low resolutions and Class I for resolutions of 1680 x 1050 (1764000 pixel) and higher. -
Page 37: Technical Specification
Technical specification Technical specification Condensation is not permitted, neither in the rated range of operation nor in the limit range of operation. B22T-7 LED B24T-7 LED proGREEN proGREEN Dimensions and weight Visible diagonals 54.6 cm 60.97 cm Dot pitch 0.2479 mm 0.2767 mm Image size Width... -
Page 38: Vesa-Ddc-Compatible Vga Interface
Technical specification Environmental conditions Environment class 3K2, DIN IEC 721 Rated range of operation 15 °C ..35 °C Humidity 20 % ..85 % Limit range of operation 5 °C ..35 °C Humidity 15 % ..85 % VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface. -
Page 39: Sub D Port
Technical specification SUB D port Meaning Video input red Video input green Video input blue Ground Ground Video ground red Video ground green Video ground blue +5 V (DDC) Sync. ground Ground DDC Data H. sync V. sync DDC Clock... -
Page 40: Dvi-D Port
Technical specification DVI-D port Meaning TMDS Data2– TMDS Data2+ TMDS Data 2/4 Shield not connected not connected DDC Clock DDC Data Analog Vertical Sync TMDS Data1– TMDS Data1+ TMDS Data 1/3 Shield not connected not connected +5V Power Earth Hot Plug Detect TMDS Data0–... -
Page 41: Hdmi Port
Technical specification HDMI port Meaning TMDS Data2+ TMDS Data2 Shield TMDS Data2– TMDS Data1+ TMDS Data1 Shield TMDS Data1– TMDS Data0+ TMDS Data0 Shield TMDS Data0– TMDS Clock+ TMDS Clock Shield TMDS Clock– N.C. DDC/CEC Ground +5 V Power Hot plug detect...