Table of Contents
Available languages
Available languages
Wiring connection
(for KD-R960BTS / KD-AR865BTS)
KD-R960BTS
Front output
Rear/subwoofer output
Vehicle dashboard
Factory wiring
harness (vehicle)
Vehicle-specific Wiring
Harness (separately
purchased)
For more information:
Metra Electronics:
www.metraonline.com
Scosche Industries:
www.scosche.com
KD-AR865BTS
Rear output
Front output
Subwoofer output
To the steering
wheel remote
control adapter
Recommended
connection
Blue: To power antenna
Blue/white: To amplifier
Brown
(Not used)
*
1
Firmly connect the ground wire of the amplifier
to the car's chassis to avoid damaging the unit.
Fuse (10 A)
Antenna terminal
Light blue/yellow
STEERING
WHEEL
REMOTE
Join the same color wires together.
Blue/white: Remote (200 mA max.)
Orange/white: Illumination
Yellow: Battery 12 V
Red: Ignition 12 V
Black: Ground
Gray: Front speaker (right)
Gray/black
White: Front speaker (left)
White/black
Purple: Rear speaker (right)
Purple/black
2
Green: Rear speaker (left) *
2
Green/black *
Signal cord (not supplied)
MIC (Microphone input
terminal) ( 14)
To the optional SiriusXM Vehicle Tuner
(commercially available) ( 11)
Ignition switch
Car fuse block
Separate
red wire
Make this connection if your vehicle
factory wiring harness does not have
"12 V ignition switch" wire.
*
2
You can also connect a subwoofer speaker directly
using this lead without an external subwoofer
amplifier. For setting, 21, 22.
JVC Amplifier *
1
Remote wire
(not supplied)
31
ENGLISH
Hide quick links:
Chapters
Table of Contents
