JVC KD-R995BTS Instruction Manual
  1. Manuals
  2. Brands
  3. JVC Manuals
  4. Car Receiver
  5. KD-R995BTS
  6. Instruction manual

JVC KD-R995BTS Instruction Manual

Cd receiver
Hide thumbs
Table of Contents

Quick Links

KD-R995BTS / KD-R990BTS / KD-R895BTS / KD-R792BT /
KD-R790BT / KD-RD99BTS / KD-RD79BT / KD-R99MBS
CD RECEIVER
INSTRUCTION MANUAL
Table of Contents
loading

Related Manuals for JVC KD-R995BTS

Summary of Contents for JVC KD-R995BTS

  • Page 1 KD-R995BTS / KD-R990BTS / KD-R895BTS / KD-R792BT / KD-R790BT / KD-RD99BTS / KD-RD79BT / KD-R99MBS CD RECEIVER INSTRUCTION MANUAL...

  • Page 2: Table Of Contents

    How to read this manual SPECIFICATIONS • Operations are explained mainly using buttons on the faceplate of KD-R995BTS. INSTALLATION/ • English indications are used for the purpose of explanation. You can select the display language from the menu. ( 5) CONNECTION •...

  • Page 3: Basics

    Volume knob Loading slot Remote sensor (Do not expose to bright sunlight.) Pull out the insulation sheet when using for KD-R995BTS: the first time. Detach button USB cable from the rear of the unit Attach Detach How to reset...

  • Page 4: Getting Started

    GETTING STARTED Set the basic settings Press and hold Turn the volume knob to select an item (see the following table), then press the knob. Repeat step until the desired item is selected or activated. Press to exit. Cancel the demonstration To return to the previous setting item, press When you turn on the power for the first time (or [FACTORY RESET] is set Default: XX...

  • Page 5: Radio

    RADIO GETTING STARTED F/W UPDATE UPDATE SYSTEM F/W UP YES: Starts upgrading the firmware. ; xxxx NO: Cancels (upgrading is not activated). “ST” or “STEREO” lights up when receiving an FM stereo broadcast with sufficient signal strength. FACTORY YES: Resets the settings to default (except the RESET stored station). ;...
  • Page 6 RADIO TIMER have selected, that station is tuned in. 1 ONCE/DAILY/WEEKLY/OFF: Select how often the timer will be turned on. KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS/KD-R99MBS: Selectable only when SiriusXM Vehicle Tuner is connected. ( 13) 2 FM/AM/SIRIUS XM * : Select the source. 3 01 to 18 (for FM/SIRIUS XM)/01 to 06 (for AM): Select the preset Selectable only when [ONCE] or [WEEKLY] is selected in step station.
  • Page 7 RADIO Default: XX ON: Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up) while listening to all sources except in AM. ; OFF: Cancels. TUNER SETTING (for KD-R792BT) N.AMERICA: For North/Central/South America, AM/FM intervals: RADIO TIMER Turns on the radio at a specific time regardless of the current source. AREA 10 kHz/200 kHz. ;...

  • Page 8: Cd/Usb/Ipod/Android

    When connecting an Android device, “Press [VIEW] to install JVC MUSIC PLAY APP” is shown. Follow the instructions USB cable * to install the application. You can also install the latest version of JVC MUSIC PLAY application on your Android device (commercially available) before connecting.
  • Page 9 (via USB input terminal). Press the volume knob to start searching. Preparation: Install the latest version of JVC Remote application on your device before • To return to the previous setting item, press connecting. • To cancel, press and hold You can make the settings in the same way as connection via Bluetooth.

  • Page 10: Pandora

    [BY DATE]: According to the registered date and/or [A-Z]: By alphabetical order Turn the volume knob to select the desired station, then press the KD-R995BTS: You can also connect to knob. the USB cable from the rear of the unit. To cancel, press and hold Press repeatedly to select PANDORA FRONT/PANDORA REAR/PANDORA.

  • Page 11: Iheartradio

    Press 3 again to listen to the station. and/or Search and store a station KD-R995BTS: You can also connect to the USB cable from the rear of the unit. Press Turn the volume knob to select a category, then press the knob.

  • Page 12: Spotify

    Save favorite song information and/or While listening to the Radio on Spotify... KD-R995BTS: You can also connect to Press and hold the volume knob. the USB cable from the rear of the unit. “SAVED” appears and the information is stored to “Your Music” or “Your Press repeatedly to select SPOTIFY FRONT/SPOTIFY REAR/...

  • Page 13: Siriusxm® Radio

    SiriusXM® Radio (for KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS/KD-R99MBS) Only SiriusXM® brings you more of what you love Start listening to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, Press repeatedly to select SIRIUS XM. news, talk, comedy and entertainment. Welcome to the Press world of satellite radio.
  • Page 14 SiriusXM® Radio (for KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS/KD-R99MBS) Using SiriusXM tuner models later than SXV200: This unit can SiriusXM Replay™ assign a maximum of 18 SmartFavorites channels. Initially, all preset While listening to a channel..channels are assigned as SmartFavorites. Press the volume knob.
  • Page 15 SiriusXM® Radio (for KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS/KD-R99MBS) 1 Press the volume knob to enter [NEW CODE]. TuneScan™ CODE SET 2 Turn the volume knob to select a number. You can get a short preview of the songs that you have missed on each of 3 Press to move to the entry position.

  • Page 16: Bluetooth

    BLUETOOTH® BLUETOOTH — Connection Pair and connect a Bluetooth device for the first time Press to turn on the unit. Supported Bluetooth profiles – Hands-Free Profile (HFP) Search and select “KD-R9 BTS”/“KD-R8 BTS”/“KD-R7 BT”/“KD-RD9 BTS”/ – Advanced Audio Distribution Profile (A2DP) “KD-RD7 BT”/“KD-R9 MBS”...
  • Page 17 – [AUTO PAIRING] is set to [ON]. ( 20) KD-R792BT/KD-R790BT/KD-RD79BT: – JVC MUSIC PLAY application is installed on The buttons will blink in the blinking pattern you have selected in [RING ILLUMI]. ( 18) the Android device ( 8) and [AUTO MODE] is •...
  • Page 18 15. the selected time (in seconds). ; OFF: Cancels. Operations may vary according to the connected Bluetooth device. RING COLOR KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS/ KD-R99MBS: Improve the voice quality COLOR 01 to COLOR 49 (COLOR 08): Selects the light color for the buttons as notification when there is an incoming call and during While talking on the phone..
  • Page 19 BLUETOOTH® DIAL NUMBER 1 Turn the volume knob to select a number (0 to 9) or character BATT/SIGNAL * KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS/KD-R99MBS: ( , #, +). AUTO: Shows the strength of the battery and signal when the unit detects a 2 Press to move the entry position.
  • Page 20 BLUETOOTH® Make a call from memory INITIALIZE YES: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ; NO: Cancels. Press to enter Bluetooth mode. MY BT NAME: Displays the unit name Press one of the number buttons (1 to 6). INFORMATION (“KD-R9 BTS”/“KD-R8 BTS”/“KD-R7 BT”/...
  • Page 21 BLUETOOTH® After pairing is successful, “PAIRING OK” BLUETOOTH — Audio “[Device Name]” appears and Bluetooth While in BT AUDIO source, you can compatibility check starts. connect to five Bluetooth audio If “CONNECT NOW USING PHONE” appears, devices and switch between these operate the Bluetooth device to allow five devices.
  • Page 22 STATUS IOS CONNECTED: You are able to use the application using JVC Remote application is designed to control the JVC car receiver’s operations from the iPhone/iPod connected via Bluetooth or USB input the iPhone/iPod (via Bluetooth or via USB input terminal) or Android smartphone (via terminal.
  • Page 23 BLUETOOTH® Listen to Spotify Internet radio via Bluetooth Preparation: You can listen to internet radio (Pandora, iHeartRadio and Spotify) on the Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT]. ( 4) iPhone/iPod touch/Android device via Bluetooth on this unit. Open the Spotify application on your device. •...

  • Page 24: Aux

    AUDIO SETTINGS Use a portable audio player Connect a portable audio player (commercially available). 3.5 mm (1/8") stereo mini plug with “L” shaped connector (commercially available) Portable audio player Press and hold Turn the volume knob to select an item (see the following table), Auxiliary input jack then press the knob.
  • Page 25 AUDIO SETTINGS Adjust your own sound settings. BALANCE * PRO EQ POSITION L15 to POSITION R15 (POSITION 00): Adjusts the left and • The settings are stored to [USER]. right speaker output balance. • The settings made may affect the current settings of [EASY EQ]. VOLUME ADJUST LEVEL –15 to LEVEL +06 (LEVEL 00): Preset the initial volume level of each source (compared to the FM volume level).
  • Page 26 Connection via lineout terminals settings you can also enjoy the subwoofer output. ( 42) For connections through an external amplifier. ( 43) Audio signal through rear speaker lead Setting on KD-R995BTS/KD-R895BTS/KD-R99MBS: [SPK/PRE OUT] L (left) R (right) Audio signal through lineout terminal...
  • Page 27 AUDIO SETTINGS 2-way crossover setting items Crossover settings Below are the available setting items for 2-way crossover and 3-way SPEAKER SIZE crossover. FRONT SIZE 3.5"/4"/4.75"/5"/6.5"/6.75"/7"/4×6/5×7/6×8/ Caution 6×9/7×10 Select a crossover type according to how the speakers are connected. TWEETER SMALL/MIDDLE/LARGE/NONE (not connected) ( 42, 43) REAR * 3.5"/4"/4.75"/5"/6.5"/6.75"/7"/4×6/5×7/6×8/6×9/7×10/...
  • Page 28 Displayed only when [SPK/PRE OUT] is set to [REAR/REAR] or [REAR/SUB.W]. ( 26) • 2ND ROW/3RD ROW: Selectable only when [CAR TYPE] Except KD-R995BTS/KD-R895BTS/KD-R99MBS: Displayed only when [SPK/PRE OUT] is set to is selected as [MINIVAN] or [MINIVAN(LONG)]. [REAR/SUB.W] or [SUB.W/SUB.W]. ( 26) Displayed only when [SUBWOOFER SET] is set to [ON].

  • Page 29: Display Settings

    DISPLAY SETTINGS AUDIO SETTINGS Zone identification for brightness setting Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS] If you specify the distance from the center of the KD-R995BTS/KD-R990BTS/KD-R895BTS/ KD-R792BT/KD-R790BT/KD-RD79BT/ currently set listening position to every speaker, KD-RD99BTS KD-R99MBS the delay time will be automatically computed and set.
  • Page 30 5-second intervals. ; SCROLL OFF: Cancels. Store your own day and night illumination colors for the buttons. DAY COLOR COLOR (for KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS) 1 RED/GREEN/BLUE: Select a primary color. 2 00 to 31: Select the level. Select illumination colors for the buttons on different zones separately.

  • Page 31: Learning Steering Remote Control

    [ZONE 2] illumination colors will change to the cable (supplied) default colors. Gray/red Connect to your vehicle’s steering Bright green/red Learning steering remote harness. Contact your JVC remote input terminal dealer for details. Purple/red Rear panel Configure the control keys Press and hold Turn the volume knob to select [SYSTEM], then press the knob.

  • Page 32: References

    REFERENCES LEARNING STEERING REMOTE CONTROL (for KD-R792BT) Press and hold any control keys on your steering remote control which Maintenance you want to assign. Cleaning the unit Wipe off dirt on the faceplate with a dry silicone or soft cloth. A list of key functions will appear on the display.
  • Page 33 REFERENCES • Depending on the version of the operating system of the iPod/iPhone, some functions may Playable files • Playable audio file: not operate on this unit. For disc: MP3 (.mp3), WMA (.wma), AAC (.aac) For USB mass storage class device: About Android device •...
  • Page 34 , the display information changes. • If the information is unavailable or not recorded, “NO TEXT”, “NO NAME”, or other information (eg. station name) appears or display will be blank. Display information Source name KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS/KD-R99MBS KD-R792BT/KD-R790BT/KD-RD79BT FM or AM Frequency (Date/Clock) *...
  • Page 35 Battery and signal strength of the Bluetooth device will be shown if [BATT/SIGNAL] is set to [AUTO]. ( 19) For KD-R995BTS/KD-R990BTS/ KD-R895BTS/KD-RD99BTS/KD-R99MBS: The color of the button illumination changes and synchronises with the music. For KD-R792BT/KD-R790BT/KD-RD79BT: The brightness of the button illumination changes and synchronises with the music.

  • Page 36: Troubleshooting

    TROUBLESHOOTING Symptom Remedy Symptom Remedy Sound cannot be heard. • Adjust the volume to the optimum level. “UNSUPPORTED DEVICE” • Check whether the connected device is compatible with • Check the cords and connections. appears. this unit and ensure the file systems are in supported formats.
  • Page 37 You try to access from a country which Pandora is not ( 33) deliverable. Cannot playback at • Make sure JVC MUSIC PLAY APP is installed on the Android Station cannot be selected. If “Explicit Content” in [Account Settings] is checked device. ( 8) [AUTO MODE].
  • Page 38 TROUBLESHOOTING Symptom Remedy Symptom Remedy The selected channel is unavailable. Sound is being interrupted • Reduce the distance between the unit and the Bluetooth “CH UNAVAIL” or skipped during playback audio player. of a Bluetooth audio • Turn off, then turn on the unit and try to connect again. player.

  • Page 39: Specifications

    SPECIFICATIONS FM Frequency Range USB Standard 87.9 MHz — 107.9 MHz (200 kHz step) USB 1.1, USB 2.0 (Full speed) 87.5 MHz — 108.0 MHz (50 kHz step) Compatible Devices Mass storage class Usable Sensitivity (S/N = 26 dB) 8.2 dBf (0.71 μV/75 Ω) File System FAT12/16/32 Quieting Sensitivity (DIN S/N = 46 dB) 17.2 dBf (2.0 μV/75 Ω) Maximum Supply Current DC 5 V ...

  • Page 40: Installation/Connection

    4 Ω — 8 Ω – Insulate unconnected wires with vinyl tape. Preout Level/Load (CD/USB) KD-R995BTS: – Be sure to ground this unit to the car’s chassis again after installation. 5 000 mV/10 kΩ load – Secure the wires with cable clamps and wrap vinyl tape around the wires that comes into KD-R895BTS/KD-R99MBS: contact with metal parts to protect the wires.
  • Page 41 INSTALLATION/CONNECTION Part list for installation Installing the unit (in-dash mounting) (A) Faceplate (B) Trim plate Do the required wiring. (  42) (C) Mounting sleeve (D) Wiring harness Hook on the top side Orientate the trim Dashboard of plate as illustrated your car before fitting.

  • Page 42: Remote Control (Rm-Rk52)

    INSTALLATION/CONNECTION Wiring connection IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Vehicle dashboard Antenna terminal Fuse (10 A) Factory wiring Light blue/yellow To the steering wheel...
  • Page 43 INSTALLATION/CONNECTION Connecting external components KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS/KD-R99MBS: MIC (Microphone input terminal) ( 16) KD-R995BTS: USB cable (DC 5 V 1.5 A) (approx. 1.2 m/4 feet) KD-R792BT: Learning steering remote ( 31) KD-R995BTS/KD-R990BTS/KD-R895BTS/KD-RD99BTS/KD-R99MBS: Expansion port (12 V   500 mA) To the optional SiriusXM Vehicle Tuner...

This manual is also suitable for:

Kd-r990btsKd-r792btKd-r790btKd-r895btsKd-rd79btKd-rd99bts ... Show all

Table of Contents