Related Manuals for Emerson CKD9918
Summary of Contents for Emerson CKD9918
- Page 1 Dual Alarm Clock Radio with CD Player OWNER'S MANUAL CKD9918 Visit our web site at www.emersonradio.com...
-
Page 2: Important Safety Instructions
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Avertissement: pour réduire le risque d‚incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l‚humidité. - Page 3 This product was manufactured using the highest quality components and standards of workmanship. It was tested by Emerson inspectors and found to be in perfect working order before it left our factory. However, there is always the chance that some problem may occur because of rough handling during shipment to the retail store or to the final consumer.
-
Page 4: Important Notes
IMPORTANT NOTES CLASS 1 LASER PRODUCT This product contains a low power Laser Device. Avoid installing this unit in places • Operate controls and switches as • exposed to direct sunlight or close to described in the manual. heat radiating appliances such as •... - Page 5 PREPARATION FOR USE MPORTANT NOTES Unpacking And Set Up Remove the unit from the carton, and remove all packing materials from the unit. Save the carton and packing materials in case the unit ever needs to be returned for service. Using the original carton and packing materials is the only way to safely repack the unit for shipment.
- Page 7 Battery Back Up System This unit uses a single CR2032 battery (not included) to maintain the Time, Alarm time and Radio preset stations settings in the event that it is accidentally unplugged, or you experience a temporary power failure. We recommend that you install a well-known brand of Lithium battery for longest life and best performance.
-
Page 8: Location Of Controls And Indicators
LOCATION OF CONTROLS AND INDICATORS CLK. SET FUNCTION REPEAT/ RANDOM PROG./ MEM. PRESET 26 27 28 29 30... - Page 9 LOCATION OF CONTROLS AND INDICATORS 1.) VOLUME Control 2.) DIMMER (HIGH / LOW) Selector Switch STOP Button PLAY / PAUSE Button 5.) SNOOZE Button 6.) LED Display 7.) AUX IN Jack 8.) PHONES Jack 9.) AM TIME Indicator 10.) AL1 (Alarm 1) Indicator 11.) Time / Frequency Display 12.) AL2 (Alarm 2) Indicator 13.) ST (FM Stereo) Indicator...
-
Page 10: Setting The Time
Setting the Time Press the POWER/ALARM OFF button to turn off the unit, press once the CLK SET button and then press either the buttons to adjust the hour time forward or backward as desired. Press again the CLK SET button and then either the buttons to adjust the minute time forward or backward as desired. - Page 11 To Store the Preset Stations This radio system can program up to maximum 20 preset stations for each FM radio and AM radio. To store the stations to the preset station memory, press the POWER/ALARM OFF button to turn On the unit. Press FUNCTION button repeatedly until FM radio or AM radio is selected.
-
Page 12: Antenna Information
Antenna Information The AM ferrite bar antenna is inside the cabinet. If AM reception is unsatisfactory, try turning the entire unit slightly until you find the direction that provides the best reception for the desired station. The FM antenna is built in to the AC power cord. If the FM reception is weak, try varying the position and direction of the power cord until you find the strongest signal. -
Page 13: Playing Compact Discs
Playing Compact Discs NOTE: This CD player can read CD-R/RW discs, in addition to normal CDs, however; the compatibility of CD-R/RW discs may be affected by the type of software that was used to create the discs, as well as the quality and condition of the blank media you are using. -
Page 14: High Speed Music Search
7.) To Pause briefly during playback press the button. The “ PLAY ” indicator flashes and PLAY after a few seconds the display returns to correct time. The sound stops, but the disc continues to spin. Press button again to cancel pause and resume playback. -
Page 15: Repeat Playback
Repeat Playback You can program the player to repeat a single track or the entire disk continuously. One Track Repeat 1. During CD disc playback, press the buttons to select the track to be repeated. 2. Press the REPEAT/RANDOM button until the PLAY REP (repeat) indicator blinks. -
Page 16: Programmed Playback
Programmed Playback The CD player in this unit has a 20 track programmable memory which allows you to program any disc to play just the tracks you want to hear in the exact order that you want to hear them. You may program a track or tracks to play more than once if desired. -
Page 17: Alarm Operation
Alarm Operation Setting the ALARM Time (Wake Up time) This clock radio has two separate wake-up alarms that can be set and used independently. To set or adjust the wake-up times please proceed as follows: Alarm Time Setting : Press the POWER button to off the unit, press and hold the ALARM 1 or ALARM 2 buttons the Hour time will blink, then press the buttons to adjust the hour alarm time forward and backward as desired. -
Page 18: Turn Off Alarm
Wake to CD : Place a CD in the CD compartment and make sure the volume is set as desired. Press the POWER button to off mode, press the ALARM 1 or ALARM 2 buttons repeatedly until the display shows “cd” and AL1 or AL2 indicator turn on. -
Page 19: Auxiliary Input Jack
Auxiliary Input Jack (Connection Cable Not Included) This unit includes an AUX input jack to allow you to connect external devices, ® such as an iPod or portable MP3 player, and listen to the music stored on your external device through the speakers of this unit. Press FUNCTION button repeatly until "AU"... - Page 20 Headphone (PHONES) Jack This unit includes a 3.5mm PHONES (headphone) jack on the front panel. This allows you to connect a set of stereo headphones (not included) for private listening without disturbing others. When headphones are connected, the built-in speakers are automatically disconnected. IMPORTANT! When using stereo headphones always set the volume control to a low level before you put on the headphones.
- Page 21 CARE AND MAINTEANCE Compact Disc Care • To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. • Fingerprints and dust should be carefully wiped off the disc’s recorded surface with a soft cloth.
-
Page 22: Troubleshooting Guide
TROUBLE SHOOTING GUIDE Symptom Possible Cause Solution Radio Noise or sound distorted Station not tuned properly Retune the AM or FM on AM or FM broadcasts. for AM or FM. broadcast station. AM: The bar antenna is Reposition the unit until not positioned correctly. - Page 23 The Serial Number can be found on the bottom of the unit. We Suggest that you record the Serial Number of your unit in the space below for future reference. CKD9918...
- Page 24 CKD9918-001-01 Made In China...