Bosch FLEXIDOME corner 9000 MP Software Manual
  1. Manuals
  2. Brands
  3. Bosch Manuals
  4. Security Camera
  5. FLEXIDOME corner 9000 MP
  6. Software manual

Bosch FLEXIDOME corner 9000 MP Software Manual

Camera bosch flexidome corner 9000 mp
Hide thumbs
Table of Contents

Quick Links

Camera Browser Interface
FLEXIDOME corner 9000 MP
en
Software manual
Table of Contents
loading

Related Manuals for Bosch FLEXIDOME corner 9000 MP

Summary of Contents for Bosch FLEXIDOME corner 9000 MP

  • Page 1 Camera Browser Interface FLEXIDOME corner 9000 MP Software manual...

  • Page 3: Table Of Contents

    Running recording program 3.1.10 Audio communication 3.1.11 Processor load Playback page 3.2.1 Selecting recordings for playback 3.2.2 Exporting tracks 3.2.3 Searching for tracks 3.2.4 Controlling playback Settings Overview Configuration Menu Settings Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...
  • Page 4 Time server IP address 6.3.6 Time server type Display Stamping 6.4.1 Camera name stamping 6.4.2 Time stamping 6.4.3 Display milliseconds 6.4.4 Alarm mode stamping 6.4.5 Alarm message 6.4.6 Video watermarking AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 5: Camera Browser Interface Table Of Contents | En

    Mirror image 8.1.4 Flip image 8.1.5 Reboot device 8.1.6 Factory defaults Picture Settings — User Mode 8.2.1 Current mode 8.2.2 Mode ID 8.2.3 Copy mode to 8.2.4 Restore Mode Defaults Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...
  • Page 6 Encoding interval 9.1.7 Standard definition video resolution 9.1.8 Expert Settings 9.1.9 Default Encoder Streams 9.2.1 H.264 settings 9.2.2 JPEG stream Encoder Regions 9.3.1 Regions Recording 10.1 Storage Management 10.1.1 Device manager AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 7: Camera Browser Interface Table Of Contents | En

    11.1.8 Video output 11.1.9 Decoder 11.1.10 SSL encryption 11.1.11 Auto-connect 11.1.12 Audio 11.2 Video Content Analyses (VCA) 11.3 Audio Alarm 11.3.1 Audio alarm 11.3.2 Name 11.3.3 Signal Ranges 11.3.4 Threshold Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...
  • Page 8 VCA - Event triggered 12.4.1 Trigger 12.4.2 Trigger active 12.4.3 Trigger inactive 12.4.4 Delay [s] Interfaces 13.1 Alarm input 13.1.1 Name 13.2 Alarm Output 13.2.1 Idle state 13.2.2 Operating mode 13.2.3 Output follows AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 9: Camera Browser Interface Table Of Contents | En

    14.2 Advanced 14.2.1 SNMP 14.2.2 Authentication (802.1x) 14.2.3 RTSP port 14.2.4 UPnP 14.2.5 TCP metadata input 14.2.6 Quality of service 14.2.7 Cloud-based services 14.3 Multicast 14.3.1 Enable 14.3.2 Multicast Address Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...
  • Page 10 14.4.1 JPEG 14.5 Accounts 14.6 IP V4 filter Service 15.1 Maintenance 15.1.1 Update server 15.1.2 Firmware 15.1.3 Upload history 15.1.4 Configuration 15.1.5 SSL certificate 15.1.6 Maintenance log 15.2 System Overview AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 11: Browser Connection

    In Windows Vista, deactivate protected mode on the Security tab under Internet Options. To play back live video images, an appropriate ActiveX must be installed on the computer. If necessary, install the Bosch Video Client. Bosch Security Systems Software manual...

  • Page 12: Establishing The Connection

    If you do not connect, the camera may have reached its maximum number of connections. Depending on the device and network configuration, each camera can have up to 25 web browser connections, or up to 50 connections via Bosch Video Client or Bosch Video Management System. 1.2.1...

  • Page 13: System Overview

    The LIVEPAGE is used to display the live video stream and control the camera. Recordings The PLAYBACK page is used for playing back recorded sequences. Settings The SETTINGS page is used to configure the camera and the application interface. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 14: Operation Via The Browser

    The items shown depend on the settings on the LIVEPAGE Functions page. Figure 3.1 Livepage 3.1.1 Image selection Click a tab below the video image to display a camera image stream. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 15: Status Icons

    Indicates a gap in the recorded video. Watermark flag Watermark is set on media item. Invalid watermark flag Indicates that the watermark is not valid. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 16: Cameras With Ptz Control

    Click and hold for far focus; click and hold for near focus. Click and hold to close the iris; click and hold to open the iris. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 17: View Control Roi

    To select a particular region of the image: Click and hold the arrows to move up and down, and from side to side through the image. Click and hold the center area to move in all directions. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 18: Cameras With Alarm I/O

    The camera alarm output allows the operation of an external device (for example, a light or a door opener).  To operate, click the relay symbol. – The symbol is red when the output is activated. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 19: System Log / Event Log

    Saving begins immediately. The red dot on the icon indicates that a recording is in progress. Click the recording icon again to stop recording. Play back saved video sequences using the Player from Bosch Security Systems. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 20: Running Recording Program

    When accessing the camera with a browser, the processor load and network information is available in the upper right of the window next to the Bosch logo. Move the mouse cursor over the icons to display numerical values. This information can help with problem solving or when fine tuning the device.

  • Page 21: Playback Page

    Use the arrow buttons at the bottom to browse the list. To view tracks beginning from a particular time, enter the time code and click Get Tracks. Click a track. The playback for the selected sequence starts. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 22: Exporting Tracks

    Click Start Search. The results are shown in the search results tab Click a result to play it back. Click the search tab to enter a new search. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 23: Controlling Playback

    Use the jog dial to quickly scan the sequences. The time code is displayed above it. The buttons have the following functions: Start/Pause playback Select the playback speed using the speed regulator Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...
  • Page 24 Jump to the following bookmark Bookmarks are only valid while in the Recordings page; they are not saved with the sequences. All bookmarks are deleted when you leave the page. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 25: Settings Overview

    You can access all device parameters in this mode. Settings that affect the fundamental functionality of the device (such as firmware updates) can only be changed in this mode. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 26: Settings

    All settings are backed up in the device memory so they are not lost even if the power fails. The exception is the time settings, which are lost after 1 hour without power if no central time server is selected. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 27: Basic Mode

    When assigning passwords, always start from the highest authorization level, service, and use different passwords. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...
  • Page 28 Re-enter the new password to ensure that there are no typing mistakes. The new password is only saved after clicking Set. Therefore, click Set immediately after entering and confirming the password, even if assigning a password at another level. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 29: Date/Time

    It is recommended that you select the SNTP server protocol. This protocol provides high accuracy and is required for special applications and future function extensions. Select Time server if the server uses the RFC 868 protocol. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 30: Network

    Enter the appropriate subnet mask for the set IP address. Gateway address Enter the IP address of the gateway to establish a connection to a remote location in a different subnet. Otherwise, this field can remain empty (0.0.0.0). AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 31: Encoder

    This page provides general information on the hardware and firmware system, including version numbers. No items can be changed on this page but they can be copied for information purposes when troubleshooting. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 32: Advanced General Settings

    Initiator extension Add text to an initiator name to make identification easier in large iSCSI systems. This text is added to the initiator name, separated from it by a full stop. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 33: Password

    Re-enter the new password to ensure that there are no typing mistakes. The new password is only saved after clicking Set. Therefore, click Set immediately after entering and confirming the password, even if assigning a password at another level. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 34: Date/Time

    Note: If a table is not created, there is no automatic switching. When editing the table, note that values occur in linked pairs (DST start and end dates). AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 35: Time Server Ip Address

    It is recommended to select the SNTP server protocol. This protocol provides high accuracy and is required for special applications and future function extensions. Select Time server if the server uses the RFC 868 protocol. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 36: Display Stamping

    Custom option, or it can be set to Off for no overlay information. If the Custom option is selected, enter values in the X and Y position fields. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 37: Alarm Message

    Select On in the drop-down box for the transmitted video images to be watermarked. After activation, all images are marked with an icon. The icon indicates if the sequence (live or saved) has been manipulated. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 38: Web Interface

    In Motion+ mode, the sensor areas for motion detection are marked. 7.1.5 Show overlay icons When selected, the camera status icons are displayed as an overlay on the video images. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 39: Select Video Player

    Select the player to be used for live mode viewing. 7.1.7 JPEG size, interval and quality Select the size, update interval and quality of the M-JPEG image displayed on the livepage. The highest quality is 1. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 40: Livepage Functions

    If a output is switched, the icon changes color. 7.2.5 Show event log The event messages are displayed with the date and time in a field next to the video image. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 41: Show System Log

    Path for JPEG and video files Enter the path for the storage location of individual images and video sequences saved from the Livepage. If necessary, click Browse... to find a suitable folder. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 42: Logging

    File for system log Enter the path for saving the system log here. If necessary, click Browse... to find a suitable folder. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 43: Camera

    Factory defaults Click Defaults to restore the factory defaults for the camera. A confirmation screen appears. Allow 5 seconds for the camera to optimize the picture after a mode reset. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 44: Picture Settings - User Mode

    It can also be used for industrial applications where fast moving objects are to be monitored. Motion artifacts are minimized. This mode should be optimized for a sharp and detailed picture in colour and black/white mode. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...
  • Page 45 Intelligent AE (BLC when IVA is unavailable) This mode is optimized for scenes with people moving in front of a bright background. Vibrant This mode has enhanced contrast, sharpness and saturation. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 46: Picture Settings - Color

    +50 to offset the factory white point alignment (reducing blue introduces more yellow). It is only necessary to change the white point offset for special scene conditions. Default Click Default to set all video values to their factory setting. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 47: Picture Settings - Alc

    Auto - the camera switches the IR cut-off filter on and off depending on the scene illumination level. Color - the camera always produces a color signal regardless of light levels. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...
  • Page 48 A low (negative) value means that the camera switches to monochrome at a lower light level. A high (positive) value means that the camera switches to monochrome at a higher light level. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 49: Picture Settings - Enhance

    The higher the value, the more noise filtering. 8.5.6 Spatial noise filtering Adjusts the spatial noise filtering level between -15 and +15. The higher the value, the more noise filtering. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 50: Encoder Settings

    Refer to Section 9.1 Encoder Profile, page 53 for more information on setting up the encoder profile. Refer to Section 9.3 Encoder Regions, page 59 for more information on setting up the encoder streams. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 51: Privacy Masks

    Place the cursor inside the shaded box and drag to change its position. Click Freeze to stop updates of the live image. The number of pixels inside the selected area is displayed for streams 1 and 2. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 52: Encoder Settings

    This can help in reducing the bit rate. For example, important objects can be selected to provide higher quality encoding than selected background areas. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 53: Encoder Profile

    To change a profile, select it by clicking its tab, then change the parameters within that profile. If a setting outside the permitted range for a parameter is entered, the nearest valid value is substituted when the settings are saved. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 54: Profile Name

    Expert Settings If necessary, use the expert settings to adapt the I-frame quality and the P-frame quality to specific requirements. The setting is based on the H.264 quantization parameter (QP). AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...
  • Page 55 Observe the coverage area during normal movement in the preview images. Set the value for Min. P-frame QP to the highest value at which the image quality still meets your needs. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 56: Default

    Select the appropriate encoding quality level for an object region defined in Encoder Regions. The lower the QP value, the higher the encoding quality. 9.1.9 Default Click Default to return the profile to the factory default values. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 57: Encoder Streams

    Regions of Interest (ROI) If you select an ROI property for stream 2, you can set up a region of interest on the Livepage. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 58: Jpeg Stream

    Select the Max. frame rate in images per second (IPS). – The Picture quality slider allows adjustment of the M-JPEG image quality from Low to High. Note: The M-JPEG frame rate can vary depending on system loading. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 59: Encoder Regions

    Click Set to apply the region settings. Preview Click to open a viewing window where a 1:1 live image and the bit rate for the region settings can be previewed. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 60: Recording

    The VRM is an external program for configuring recording tasks for video servers. For further information, contact your local customer service at Bosch Security Systems. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 61: Storage Management

    If the iSCSI destination is password protected, enter the password into the Password field. Click Read. – The connection to the IP address is established. The Storage overview field displays the logical drives. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...
  • Page 62 The Storage overview field displays the local media. Note: SD card recording performance is highly dependent on the speed (class) and performance of the SD card. An SD card of Class 6 or higher is recommended. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 63: Activating And Configuring Storage Media

    Click OK to close the window. 10.1.5 Deactivating storage media A storage medium in the Managed storage media list can be deactivated. It is then no longer used for recordings. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...
  • Page 64 Camera Browser Interface Click a storage medium in the Managed storage media list to select it. Click Remove below the list. The storage medium is deactivated and removed from the list. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 65: Recording Profiles

    Select the encoder profile setting that is to be used with stream 1 and 2 when recording. This selection is independent of the selection for live stream transmission. (The properties of the encoder profiles are defined on the Encoder Profile page.) Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 66: Recording Track Selection

    – Off: no automatic recording takes place. Stream Select the stream to be used for standard recordings: – Stream 1 – Stream 2 – I-frames only AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 67: Alarm Recording

    Recordings are overwritten when the retention time entered here has expired.  Enter the required retention time in days for each recording track. Make sure that the retention time does not exceed the available recording capacity. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 68: Recording Scheduler

    Assign the defined holidays to the recording profile as described above. Delete user-defined holidays as follows: Click Delete in the Holidays tab. A new window opens. Click the date to be deleted. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 69: Profile Names

    Recordings that are currently running are interrupted and the configuration can be modified. 10.4.5 Recording status The graphic indicates the recording activity. An animated graphic is displayed when recording is taking place. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 70: Recording Status

    | Recording Camera Browser Interface 10.5 Recording Status Details of the recording status are displayed here for information. These settings cannot be changed. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 71: Alarm

    Bosch Video Client or the Bosch Video Management System. The camera connects to all remote stations protected by the same general password. To define a...

  • Page 72: Video Transmission

    11.1.9 Decoder If a split image is set for the selected video output, select a decoder to display the alarm image. The decoder selected determines the position of the image. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 73: Ssl Encryption

    IP addresses after each reboot, connection breakdown, or network failure. 11.1.12 Audio (only for cameras with audio) Select On to transmit the audio stream with an alarm connection. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 74: Video Content Analyses (Vca)

    This can lead to impairment of the VCA system. Observe the processor load and optimize the encoder settings or the VCA settings if necessary, or turn off VCA completely. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 75: Audio Alarm

    Select On for the device to generate audio alarms. 11.3.2 Name The name makes it easier to identify the alarm in extensive video monitoring systems, for example with the Bosch Video Client and the Bosch Video Management System. Enter a unique and clear name here. 11.3.3 Signal Ranges Exclude particular signal ranges in order to avoid false alarms.

  • Page 76: Alarm E-Mail

    Obtain information on operating your mobile phone from your mobile phone provider. 11.4.6 Image size Select the size of the JPEG images that are to be sent from the camera. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 77: Attach Jpeg From Camera

    This makes it easier to identify the origin of the e-mail. 11.4.10 Test e-mail Click Send Now to test the e-mail function. An alarm e-mail is immediately created and sent. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 78: Alarm Task Editor

    If the transfer was successful, the message Script successfully parsed. is displayed over the text field. If it was not successful, an error message is displayed with further information. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 79: Setting Up Vca

    In this configuration, metadata is created to facilitate searches of recordings, however, no alarm is triggered.  In the VCA configuration drop-down list, select Silent VCA. No parameters can be changed for this selection. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 80: Vca - Profiles

    With the Motion+ analysis type, for example, the sensor fields in which motion is recorded are marked with rectangles. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 81: Motion Detector

    The debounce time prevents very brief alarm events from triggering individual alarms. If the Debounce time 1 s option is activated, an alarm event must last at least 1 second to trigger an alarm. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 82: Tamper Detection

    Trigger delay [s] Set delayed alarm triggering here. The alarm is only triggered after a set time interval in seconds has elapsed and then only if AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...
  • Page 83 Activate this function if tampering associated with EMC interference (noisy scene as the result of a strong interference signal in the vicinity of the video lines) should trigger an alarm. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...
  • Page 84 Activate or deactivate each of these fields individually. Select only those areas for reference monitoring in which no movement takes place and that are always evenly lit, as false alarms could otherwise be triggered. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...
  • Page 85 Right-click any fields to deactivate. Click OK to save the configuration. Click the close button (X) in the window title bar to close the window without saving the changes. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 86: Vca - Scheduled

    These will later be displayed as a single entry in the table. Click OK to accept the selection. The window closes. Assign the individual holidays to the VCA profiles, as described above. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...
  • Page 87 Click Delete. A new window opens. Click the date to delete. Click OK. The item is deleted from the table and the window closes. The process must be repeated for deleting additional days. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 88: Vca - Event Triggered

    A delay period may be useful in avoiding false alarms or frequent triggering. During the delay period, the Silent VCA configuration is always enabled. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 89: Interfaces

    13.2.5 Trigger output Click the button to switch the output manually (for example, for testing purposes or to operate a door opener). Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 90: Network

    If a DHCP server is employed in the network for the dynamic assignment of IP addresses, activate acceptance of IP addresses automatically assigned to the device. Certain applications (Bosch Video Management System, Configuration Manager) use the IP address for the unique assignment of the device. If using these applications, the DHCP...

  • Page 91: Ip V6 Address

    Select a different HTTP browser port from the list if required. The default HTTP port is 80. To limit connection to HTTPS, deactivate the HTTP port. To do this, activate the Off option. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 92: Https Browser Port

    This gives the option to adjust the size of the data packets to the network environment and to optimize data transmission. In UDP mode, comply with the MTU value set below. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 93: Iscsi Mss [Byte]

    DynDNS server. Entries that change frequently are not provided in the Domain Name System. It is a good idea to force the registration when setting up the device for the first time. Only Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 94: Status

    To transfer the IP address of the device, click the Register button. 14.1.21 Status The status of the DynDNS function is displayed here for information purposes; these settings cannot be changed. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 95: Advanced

    To choose which traps are sent: Click Select. A dialog box appears. Click the check boxes of the appropriate traps. Click Set to close the window and send all of the checked traps. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 96: Authentication (802.1X)

    DiffServ Code Point (DSCP). Enter a number between 0 and 252 as a multiple of four. For alarm video you can set a higher priority than for regular video and you can AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 97: Cloud-Based Services

    Post Alarm Time over which this priority is maintained. 14.2.7 Cloud-based services The User Mode determines how the camera communicates with the Bosch Cloud-based Security and Services. For more information about these sevices and their availability, visit: http://cloud.boschsecurity.com –...

  • Page 98: Multicast

    With a 0.0.0.0 setting, the encoder for the stream operates in multi-unicast mode (copying of data stream in device). The camera supports multi-unicast connections for up to five simultaneously connected receivers. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 99: Port

    A value can be entered to specify how long the multicast data packets are active on the network. If multicast is to be run via a router, the value must be greater than 1. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 100: Image Posting

    Enter the interval in seconds at which the images are sent to the target account. Enter zero for no images to be sent. Target Select the target account for JPEG posting. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 101: Accounts

    Enter an exact path to post the images on the account server. Click Browse... to browse to the required path. Maximum bit rate Enter the maximum bit rate in kbps that will be allowed when communicating with the account. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...

  • Page 102: Ip V4 Filter

    The device itself may initiate a connection (for example, to send an alarm) outside the defined ranges if it is configured to do so. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 103: Service

    This can result in the device no longer being addressable, requiring it to be replaced. 15.1.1 Update server The address of the Bosch update server appears in the address box. Click Check to make a connection to this server. Select the appropriate version for your camera to download the firmware from the server.

  • Page 104: Upload History

    SSL certificate To work with an SSL connection, both sides of the connection must have the appropriate certificates. Upload one or more certificate files, one at a time, to the camera. AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...

  • Page 105: Maintenance Log

    Keep this information at hand when seeking technical support. Select the text on this page with a mouse and copy it so that it can be pasted into an e-mail if required. Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.06...
  • Page 106 106 en | Service Camera Browser Interface AM18-Q0649 | v5.8 | 2013.06 Software manual Bosch Security Systems...
  • Page 108 Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2013...

Table of Contents