Table of Contents
Quick Links
Table of Contents
Related Manuals for Bosch FLEXIDOME corner 7100i IR
Summary of Contents for Bosch FLEXIDOME corner 7100i IR
- Page 1 FLEXIDOME corner 7100i IR NCE‑7703‑FK | NCE‑7703‑FK‑GOV Installation Manual...
-
Page 3: Table Of Contents
FLEXIDOME corner 7100i IR Table of contents | en Table of contents Safety and security information Safety precautions Important safety instructions Notices System overview Product description Intended use Preparing for installation Unpacking Parts included Preparation In-box configuration Installation Installing the Back Cover Plate... -
Page 4: Safety And Security Information
| Safety and security information FLEXIDOME corner 7100i IR Safety and security information Read, follow, and retain for future reference all of the following safety instructions. Follow all warnings before operating the device. Safety precautions Caution! Installation should only be performed by qualified service personnel in accordance with the National Electrical Code (NEC 800 CEC Section 60) or applicable local codes. -
Page 5: Notices
FCC suppliers Declaration of Conformity FLEXIDOME corner 7100i IR: NCE-7703-FK, NCE-7703-FK-GOV Responsible party Bosch Security Systems, LLC... - Page 6 Security advisories, that is a list of identified vulnerabilities and proposed solutions: https://www.boschsecurity.com/xc/en/support/product-security/security- advisories.html Bosch assumes no liability whatsoever for any damage caused by operating its products with outdated software components. Old electrical and electronic equipment This product and/or battery must be disposed of separately from household waste.
-
Page 7: System Overview
System overview Product description The FLEXIDOME corner 7100i IR is a discreet and vandal-resistant corner mount camera, featuring an anti-ligature (no-grip) design. The device provides a detailed and complete overview of any room with no blind spots, and the smart invisible IR keeps image quality... -
Page 8: Preparing For Installation
This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately. Verify that all parts are included. If any items are missing, notify your Bosch Security Systems sales or customer service representative. -
Page 9: In-Box Configuration
FLEXIDOME corner 7100i IR Preparing for installation | en In-box configuration Without the need to fully unpack the camera from its packaging, the camera can already be pre-configured in the box. It provides direct access to an RJ45 connector right from the box. -
Page 10: Installation
| Installation FLEXIDOME corner 7100i IR Installation M20 Grommets Power input RJ45 connector Activity LED interior Reset button MicroSD card slot Alarm and Audio Note: 2-pin I/O connector is for DC12V or AC24V input terminal. 8-pin I/O connector is for alarm in/out, audio line in/out purpose... - Page 11 Grounding provides improved surge protection (up to 1 kV, 1 kA to ground (8/20 µs pulse)). The grounding wire is not included in the box. Bosch recommends the use of a grounding wire with a ring terminal. The ring terminal must not have a thickness greater than 2 mm (0.01 in.).
-
Page 12: Installing The Back Cover Plate
Use the back cover plate as template to mark and drill screw holes on the wall; Pull the RJ-45 cable through; Tighten the screws. Note: Bosch recommends wall screws with a diameter of 4 mm (0.16 in.) and a length of ≥ 30 mm (1.18 in.). 2023-10 | 01 |... -
Page 13: Installing The Cable Grommets
FLEXIDOME corner 7100i IR Installation | en Installing the Cable Grommets Remove the protrusion; Use a RJ-45 punch-through aid to pull the Ethernet cable through; Insert the RJ-45 punch-through onto the Ethernet cable; Pull the Ethernet cable through the grommet. -
Page 14: Installing The Camera Module
| Installation FLEXIDOME corner 7100i IR Installing the Camera Module Put the appropriate cables for power, video, alarms, and audio through one of the access holes; Pull back the cables until no excess is left; Put the camera cover on the camera base in the right orientation. -
Page 15: Installing The Ir Cover And Front Face Plate
FLEXIDOME corner 7100i IR Installation | en Installing the IR Cover and Front Face Plate Align the IR connectors and red triangles; Place the IR cover on the camera module; Tighten the screws in the camera cover using the supplied TR20 allen key TR20 Remove the protective foil from the IR cover;... -
Page 16: Led Status
| Installation FLEXIDOME corner 7100i IR Align the face plate with the Bosch logo on top; Tighten the screws. TR20 For video instructions scan the QR code below: LED Status A status LED can be seen in the camera top, above the camera lens. -
Page 17: Connection Via The Web Browser
FLEXIDOME corner 7100i IR Connection via the web browser | en Connection via the web browser A computer with a web browser (Google Chrome, Microsoft Edge, or Mozilla Firefox) is used to receive live images, control the unit, and replay stored sequences. The unit is configured over the network using the browser. - Page 18 | Connection via the web browser FLEXIDOME corner 7100i IR Enter the user name (“service”) and a password in the appropriate fields. Refer to the section User Management for more information. After a service-level password is set for the device, the device displays a dialog box that prompts users to enter the user name (“service”) and the service-level password every time...
-
Page 19: Troubleshooting
FLEXIDOME corner 7100i IR Troubleshooting | en Troubleshooting Resolving problems The following table is intended to help identify the causes of malfunctions and correct them where possible. Malfunction Possible causes Solution Unit does not operate. Power failure. Check power supply. Check if PoE, 12 V or 24 V auxiliary... -
Page 20: Customer Service
| Troubleshooting FLEXIDOME corner 7100i IR – The device is not properly connected to the network. Check the cable connections in this case. – The device is not correctly integrated into the network. Check the IP address, subnet mask, and gateway address. -
Page 21: Maintenance
FLEXIDOME corner 7100i IR Maintenance | en Maintenance Cleaning Lens cleaning It is important to keep the lens clean to ensure optimum performance. Dust, grease, or fingerprints should be removed from the lens surface. When cleaning the lens, take extra care not to damage the special coating used to reduce light reflections. -
Page 22: Decommissioning
| Decommissioning FLEXIDOME corner 7100i IR Decommissioning Transfer The device should only be passed on together with this Installation manual. Disposal Old electrical and electronic equipment This product and/or battery must be disposed of separately from household waste. Dispose such equipment according to local laws and regulations, to allow their reuse and/or recycling. - Page 24 Bosch Security Systems B.V. Torenallee 49 5617 BA Eindhoven Netherlands www.boschsecurity.com © Bosch Security Systems B.V., 2023 Building solutions for a better life. 202401151147...