Configuring Phone Settings; Pair An Additional Handset With The Base Station; Registering The Handset - Cisco SPA302D User Manual
Ip dect handset
Hide thumbs
Also See for SPA302D:
- Owner's manual (49 pages) ,
- User manual (38 pages) ,
- Datasheet (7 pages)
Table of Contents
5.0 Configuring Phone Settings
To reach the Settings menu, press the centre Select button, scroll to Settings, and press the Select button again.
In the Settings menu, press the arrow buttons to select the settings you want to change and press the Select
button. You can perform the following tasks:
Ringtones: There are 5 different ringtones and for private contacts the user can select a different melody
Tones: You can configure a tone to play when keys on the handset are pressed or when a phone call is
parked.
Backlight Settings: You can configure the amount of time that the handset display screen remains lit before
it is turned off to conserve battery power.
Date/Time: The handset date and time is synchronized with the Cisco SPA232D. You can also enter the date
and time manually from the handset.
Handset Settings: A unique handset name can be defined which is reflected in the upper right corner of the
display. The handset name is used to identify the SPA302D with the Intercom and handset deregistration.
Factory Reset: Performing a factory reset removes all of the information from your handset (for example,
contacts, speed dials, and call records) and restores it to the original factory software state. The Cisco
SPA302D remains registered to the Cisco SPA232D after a factory reset and must be manually deregistered.
Phone Info: Information can be viewed such as Software version, IP Address, MAC Address, etc.
Handset Registration and Update Software: this is described in detail below
6.0 Pair an additional handset with the base station
If an extra SPA302D handset is purchased, it will need to be associated to the SPA232D base station.
6.1 Registering the handset
On the Cisco SPA302D handset, press the Select button in the centre of the 4-way navigation keypad
Using the navigation arrow buttons, scroll to the Settings icon and select it.
Select Handset Registration.
Select Register.
On the Cisco SPA232D, press the Page/Registration button and hold it down for at least seven seconds until
the green status light flashes quickly.
Enter the PIN code. By default, there is no PIN code (leave it blank). Then press the left soft key to confirm
that you want to register the handset. The "registering" message appears.
Cisco SPA302D and SPA232D full user guide v1.0
Hide quick links:
Table of Contents
