Table of Contents
Restoring Files Automatically
If the power of the recorder is turned off or an SDHC
Memory Card is removed during recording, the file will be
corrupted and require restoring. In the following cases, files
are restored automatically.
•
When the SDHC Memory Card that requires restoring is
inserted to the recorder, and the recorder is turned on and
transferred to the live mode
•
When the SDHC Memory Card that requires restoring is
inserted to the recorder, the card slot cover is closed, and
the recorder transfers to the live mode
•
When the SDHC Memory Card that requires restoring is
inserted to the recorder, and the recorder is transferred to
the live mode from playback mode
During automatic-restoring, the restoring status is shown on
the LCD of the remote control panel.
Notes:
•
The restoration status is displayed when Overlay OSD
on the Setup/Info screen in Administrator setup is set to
AUTO, SIMPLE, or DETAILS. (See "Viewing the status of
the recorder (Overlay OSD)" on page 69.)
•
If the [MENU] button is pressed during automatic
restoration, the progress bar disappears, but the
restoration continues.
•
If recording, playback, or trial shooting begins, or if
Administrator setup mode is obtained, the progress bar
disappears, and the restoration is canceled.
Playback with the remote control panel is not available
at present. Upgrading is scheduled for the future.
For playback, it is recommended to use the Front-End
application or Back-End Client application.
75
Hide quick links:
Table of Contents
