Viewing Live Video
Viewing the status of the recorder
(Overlay OSD)
The following function is provided to enable viewing the
status of the recorder and the trigger signal (GPI1-16) status.
1. Press the [MENU] button.
The Menu appears.
,
2. Press the [
] buttons to select [Setup/Info]
and press the [
] button to confirm the entry.
Select
Confirm
,
3. Press the [
] buttons to select [Overlay
OSD].
select
(continued)
RETURN
MENU
CONTROL PANEL
ON/
OFF
,
4. Press the [
"SIMPLE", "DETAILS" or "OFF".
Select
AUTO: The simple overlay OSD (see page 56) appears
for 3 to 5 seconds when any of the following items
have been changed.
• Mode indication
• Status display
SIMPLE: The simple overlay OSD appears.
DETAILS: The detailed overlay OSD appears.
OFF: The overlay OSD closes.
Notes:
•
The administrator can set the Overlay OSD (Init Overlay
OSD) selected at power-on.
•
See the next page for how to read the overlay OSD.
•
When "AUTO" is selected and the [BOOK MARK] button is
pressed, the simple overlay OSD does not appear but the
bookmark icon
appears for 1 to 2 seconds.
Adjusting the display position
When [Main OSD] or [Sub OSD] is set to OFF on the
Embedded OSD screen in administrator setup, select the
[Position (Press ENTER)] on the Setup/Info screen, and
press the [
] button. Then the display position moves up
and down.
55
Cursor button
MENU button
] buttons to select "AUTO",