Black & Decker VP510 Instruction Manual

380850/VP510

5/1/02

11:00 AM

INSTRUCTION

MANUAL

7.2 Volt Cordless Detail

Sander

VP510

KEY INFORMATION YOU SHOULD KNOW:

• Charge batteries before first use.

•Charger may hum; batteries or charger may become warm

while charging (batteries and charger sold separately).

• Not for use on drywall or plaster.

• Ensure sandpaper is correctly installed before using.

SAVE THIS

MANUAL FOR

FUTURE REFERENCE.

VEA EL ESPAÑOL EN LA CONTRAPORTADA.

POUR LE FRANÇAIS, VOIR LA COUVERTURE ARRIÈRE.

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE

GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE

USAR EL PRODUCTO.

Page 1

1 - 8 0 0 - 7 6 2 - 6 6 7 2

R

WARNING: IMPORTANT SAFETY WARNINGS

AND INSTRUCTIONS

TO REDUCE RISK OF INJURY:

• Before any use, be sure everyone using this tool reads and understands all

safety instructions and other information contained in this manual.

• Save these instructions and review frequently prior to use and in instructing

others.

•

WARNING:

When using electric tools, basic safety precautions should

always be followed to reduce risk of fire, electric shock, and

personal injury, including the following.

READ ALL INSTRUCTIONS

GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL TOOLS

NOTE: Refer to battery and/or charger manual for battery and charger safety and

usage information.

• KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.

• CONSIDER WORK AREA ENVIRONMENT. Keep work area well lit. Do not use

tool in presence of flammable liquids or gases. Motors in these tools normally

spark, and the sparks may ignite the fumes.

• GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded

surfaces. For example; pipes, radiators, ranges, and refrigerator enclosures. Do

not contact any exposed electrical terminals with the tool. Use extreme caution

when drilling, driving or cutting into walls, floors ceilings or other areas or

wherever live electrical wires may be encountered, DO NOT TOUCH ANY

METAL PARTS OF THE TOOL. Hold the tool only by the plastic handle to

prevent electric shock.

• KEEP CHILDREN AWAY. Do not permit children and visitors to contact the tool.

All children and visitors should be kept away from work area.

• STORE IDLE TOOLS. When not in use, tools should be stored in dry, and high or

locked-up place — out of reach of children.

• DON'T FORCE TOOL. It will do the job better and safer at the rate for which it

was intended.

• USE RIGHT TOOL. Don't force small tool or attachment to do the job of a heavy-

1

If you have any questions, call 1-800-54-HOW-TO