Installing Cisco 890 Series In A Rack - Cisco 800 Series Hardware Installation Manual
800 series integrated services router
Hide thumbs
Also See for 800 Series:
- Design manual (50 pages) ,
- Release notes (36 pages) ,
- Configuring (32 pages)
Table of Contents
Installing the Cisco 860, 880, 890 ISR
Installing Cisco 890 Series in a Rack
The Cisco 890 series ISRs can be mounted in a rack.
To install a Cisco 890 series ISR in a rack, follow these steps:
Remove the screws, as shown in
Step 1
Figure 2-43
1
1
Using the screws provided, attach the rack-mount brackets to the Cisco 890 series ISR chassis, as shown
Step 2
in
Figure
screws on both sides of the chassis.
Caution
Do not over torque the screws. The recommended torque is 6 to 8 in-lb (0.7 to 0.9 N-m).
Cisco Integrated Services Router Hardware Installation Guide
2-52
Screw Locations
1
Screws
2-44. Use two screws on each side. Use a number 2 Phillips screwdriver to install the bracket
Figure
2-43.
Chapter 2
Installing the Router
1
- Quick Links:
- Hardware Features
Hide quick links:
Chapters
Table of Contents
