1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. 860 Series
  6. Hardware installation manual

Cisco 860 Series Hardware Installation Manual

Integrated services routers
Hide thumbs Also See for 860 Series:
Table of Contents

Quick Links

See also: Installation Manual, Hardware Installation Manual
Cisco 860 Series and Cisco 880 Series
Integrated Services Routers Hardware

Installation Guide

Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number:
Table of Contents
loading

Related Manuals for Cisco 860 Series

Summary of Contents for Cisco 860 Series

  • Page 1: Installation Guide

    Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number:...
  • Page 2 You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures: •...
  • Page 3 This guide provides an overview and explains how to install, connect, and perform initial configuration for the wireless and nonwireless Cisco 860 series and Cisco 880 series integrated services routers (ISRs). Some information may not apply to your particular router model.
  • Page 4 Note material. Caution This symbol means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data. Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...
  • Page 5 üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden. BEWAHREN SIE DIESE HINWEISE GUT AUF. Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...
  • Page 6 Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...
  • Page 7 Preface Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...
  • Page 8 Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide viii OL-16193-01...
  • Page 9 Preface Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...
  • Page 10 Appliance and Material Safety Law prohibits the use of UL-certified cables (that have the “UL” shown on the code) for any other electrical devices than products designated by CISCO. The use of cables that are certified by Electrical Appliance and Material Safety Law (that have “PSE” shown on the code) is not limited to CISCO-designated products.

  • Page 11: Related Documentation

    Preface Related Documentation In addition to the Cisco 860 series and Cisco 880 series ISR Hardware Installation Guide (this document), the Cisco 860 series and Cisco 880 series ISR documentation set includes the following documents: • Regulatory Compliance and Safety Information for Cisco 800 Series and SOHO Series Routers Cisco 860 Series and Cisco 880 Series Integrated Services Routers Software Configuration Guide •...
  • Page 12 Preface Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.

  • Page 13: Product Overview

    C H A P T E R Product Overview This chapter provides an overview of the features available for the Cisco 860 series and Cisco 880 series integrated services routers (ISRs), and contains the following sections: General Description, page 1-1 •...

  • Page 14: Cisco 860 Series Isrs

    Product Overview Cisco 860 Series ISRs Cisco 860 Series ISRs The Cisco 860 series ISRs are fixed-configuration data routers that support the following features: An integrated 4-port 10/100 Ethernet switch for connecting to the LAN • A10/100 Fast Ethernet (FE) port for connecting to the WAN •...

  • Page 15: Cisco 880 Series Isrs

    Cisco 880 Series ISRs Figure 1-2 shows the back panel details of the Cisco 861 wireless (861W) ISR. Nonwireless routers do not have antennas or connectors on the back panel. However, the feature locations are similar for all Cisco 860 series routers.

  • Page 16: Cisco 880 Series Data Routers

    Cisco 880 series data routers. Some of the features shown may not be available on your router. Figure 1-3 shows the front panel details of the Cisco 880 wireless data router. The USB port and the 3G card slot are located on the front panel. Figure 1-3...
  • Page 17 Figure 1-4 shows the back panel details of the Cisco 888W data router. Nonwireless routers do not have antennas or connectors on the back panel. However, the feature locations are similar across all Cisco 880 series data routers. Figure 1-4 Back Panel of the Cisco 888-W Data Router ISDN port—not available on 3G models...
  • Page 18 Cisco 880 wireless voice router. Figure 1-5 Front Panel of the Cisco 880 Series Wireless Voice Router LEDs USB port Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...
  • Page 19 10 Kensington security slot 1. FXS = Foreign Exchange Station. 2. DID = Direct Inward Dialing. 3. FXO = Foreign Exchange Office. 4. TBP = trunk bypass. Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...

  • Page 20: Hardware Features

    3. BRI = Basic Rate Interface. Hardware Features This section provides an overview of the following hardware features for the Cisco 860 series and Cisco 880 series ISRs. A feature summary is available at the end of this section. Kensington Lock •...

  • Page 21: Kensington Lock

    When you reset the hardware when the embedded wireless access point is running Cisco Unified IOS software, the router will shutdown but the access point will continue running. Clients with Cisco Unified IOS software are controlled by a Wireless LAN Controller (WLC) and can only be reset by the controller.
  • Page 22 Chapter 1 Product Overview Hardware Features Table 1-1 LED Descriptions for the Cisco 860 Series and Cisco 880 Series ISRs (continued) Color Description 860 Series 880 Series WLAN (2.4 GHz) Green On—Radio is connected, SSID is configured, signal is being...
  • Page 23 Chapter 1 Product Overview Hardware Features Table 1-1 LED Descriptions for the Cisco 860 Series and Cisco 880 Series ISRs (continued) Color Description 860 Series 880 Series 3G RSSI Green Off—Low signal strength (lower than -100 dBm). — 3G models On—High RSSI (-69 dBm or higher).

  • Page 24: Usb Port

    Cisco IOS software image, boot flash contains the ROMMON boot code, and quack contains the cookie configuration. The default flash memory for the Cisco 860 series and Cisco 880 series ISRs is 128 MB. The default flash memory for the Cisco 880 series voice routers is 256 MB.

  • Page 25: G Cellular Data Wan Connectivity

    The Cisco 88xG models come with a 34-mm express card slot ready for use with a commercial 3G card radio. The 3G express card slot is located on the front panel. For a list of supported 3G cards see the...
  • Page 26 Chapter 1 Product Overview Hardware Features Table 1-3 Hardware Features Available in Cisco 860 Series and Cisco 880 Series ISRs (continued) Feature Description 860 Series 880 Series Console or AUX Provides a connection to the terminal or PC for software...
  • Page 27 Chapter 1 Product Overview Hardware Features Table 1-3 Hardware Features Available in Cisco 860 Series and Cisco 880 Series ISRs (continued) Feature Description 860 Series 880 Series /DID An FXS interface connects directly to a standard telephone, — SRST models port a fax machine, or similar device.
  • Page 28 Chapter 1 Product Overview Hardware Features Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide 1-16 OL-16193-01...

  • Page 29: Installing The Router

    C H A P T E R Installing the Router This chapter describes the equipment and the procedures for successfully installing the Cisco 860 series and Cisco 880 series integrated services routers (ISRs), and contains the following sections: Equipment, Tools, and Connections, page 2-1 •...

  • Page 30: Additional Items

    Chapter 2 Installing the Router Equipment, Tools, and Connections Table 2-1 Items and Their Quantities That Are Shipped with the Cisco 860 Series And Cisco 880 Series ISRs (continued) Cisco 860 Series Cisco 880 Series Item Routers Routers Power supply cable Cisco Configuration Professional (CCP) CD 1.

  • Page 31: Installing On A Table

    2-6. Mounting on a Wall The Cisco 860 series and Cisco 880 series ISRs have mounting holes on the bottom of the chassis for mounting the unit on a wall or other vertical surface. The mounting holes are bidirectional. You can hang the router with the LEDs either facing you or facing Note away from you.
  • Page 32 3.673 in. 5.961 in. Wall-mount holes Hang the router on the screws, and place the power adapter on a nearby horizontal surface. See Step 2 Figure 2-2. Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...
  • Page 33 Connect the chassis to a reliable earth ground. For the chassis ground connection procedures, see the Step 3 “Installing the Router Ground Connection” section on page 2-6. Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...

  • Page 34: Installing The Router Ground Connection

    After you install and properly ground the router, you can connect the power wiring, the WAN and LAN cables, and the cables for administrative access as required for your installation. Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...

  • Page 35: Table Of Contents

    C H A P T E R Connecting the Router This chapter describes how to connect Cisco 860 series and Cisco 880 series integrated services routers (ISRs) to Ethernet devices, Power over Ethernet (PoE), and the network. The chapter contains the...

  • Page 36: Preparing To Connect The Router

    Caution Do not turn on the devices until after you have completed all connections to the router. • Connect the color-coded cables supplied by Cisco Systems to the color-coded ports on the back panel. • If you must supply your own cable, see Appendix A, “Technical Specifications,”...

  • Page 37: Connecting A Pc, Server, Or Workstation

    (Optional) Connect additional servers, PCs, or workstations to the other Ethernet switch ports. Step 3 Note Use the Cisco Configuration Express to configure the Internet connection settings. See the Cisco Configuration Professional Quick Start Guide for more information. Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...

  • Page 38: Connecting A Phone

    RJ-45 port on a phone Ethernet switch port 1 on the router Connect the other end of the cable to the RJ-45 port on the phone. Step 2 Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...

  • Page 39: Connecting An External Ethernet Switch

    Connect the other end of the cable to the available port on the Ethernet switch to add additional Ethernet Step 2 connections. Step 3 Turn on the Ethernet switch. Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...

  • Page 40: Connecting A Terminal Or Pc To The Console Port

    Step 3 Terminal Emulator Settings Use the following settings for the terminal emulator connection: 9600 baud • 8 data bits, no parity • 1 stop bit • Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...

  • Page 41: Connecting A Data Bri Port

    To avoid damage to the router, do not connect telephone-network voltage (TNV) circuits (such as ISDN or DSL circuits) to safety extra-low voltage (SELV) circuits (such as LAN circuits). Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...
  • Page 42 Connecting the Router Connecting a Data BRI Port Although the following procedure shows a Cisco 888W data router, this procedure applies to all Cisco 880 series router with a Data BRI port. To connect the Data BRI port to the ISDN service provider, follow these steps: Connect one end of the orange ISDN S/T cable to the Data BRI port on the router.

  • Page 43: Connecting An Fe Line-Fe4 Wan Port

    Modem, which connects to the Internet WAN connection to the Internet Connect the other end of cable to an available port on the modem. Step 2 Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...

  • Page 44: Connecting A G.shdsl Line-G.shdsl Port

    The DSL line must have been provisioned by your service provider and correctly configured so that the Note LED shows the carrier detect (CD) status. If the G.SHDSL CD LED is not on, check with your DSL service provider. Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide 3-10 OL-16193-01...

  • Page 45: Connecting Power Over Ethernet

    Figure 3-8 shows how to connect the 48-VDC Power over Ethernet (PoE) power adapter in your Cisco 880 series ISR to an AC power outlet. The PoE provides power to port 0 and port 1 of the 4-port 10/100 FastEthernet switch.
  • Page 46 Chapter 3 Connecting the Router Connecting the AC Adapter To connect your Cisco 860 series or Cisco 880 series ISR to an AC power outlet, follow these steps: Connect the router to an AC power outlet as shown in Figure 3-9.
  • Page 47 DC plug. See Figure 3-10. Figure 3-10 Securing the Power Cord Power lock clip Power cord DC plug Holes on either side of the power connector Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide 3-13 OL-16193-01...

  • Page 48: Connecting An Fxs Line

    For connections outside the building where the equipment is installed, the following ports must be connected through an approved network termination unit with integral circuit protection: FXS. Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide 3-14...
  • Page 49 FXS port RJ-11 port RJ-11 cable Connect the other end of the cable to the RJ-11 port on the telephone or fax machine. Step 2 Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide 3-15 OL-16193-01...

  • Page 50: Connecting A Fxo Line

    Connecting an FXO line FXO port Telephone outlet RJ-11 cable Connect the other end of the cable to an RJ-11 telephone wall outlet. Step 2 Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide 3-16 OL-16193-01...

  • Page 51: Connecting A Voice Isdn Bri Line

    Connect one end of a straight-through RJ-45–to–RJ-45 cable to the Voice BRI port. Step 1 When the interface is configured as NT and is connecting to a TE device, use a crossover cable. Note Table A-7. Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide 3-17 OL-16193-01...
  • Page 52 Connecting a Voice BRI Line Voice BRI port Wall jack RJ-45 cable Connect the other end of the cable to the RJ-45 wall outlet or other device. Step 2 Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide 3-18 OL-16193-01...

  • Page 53: Verifying Connections

    To verify that all devices are properly connected to the router, first turn on all the connected devices. Then check the LEDs. To verify router operation, refer to Table 3-1 For full LED description see Table 1-1 LED Descriptions for the Cisco 860 Series and Cisco 880 Series ISRs. Table 3-1 Verifying the Router Operation...
  • Page 54 10. PPPoE = PPP over Ethernet. 11. PPPoA = PPP over ATM. 12. VPN = Virtual Private Network. 13. SSID = Service Set Identifier. 14. PoE = Power over Ethernet. Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide 3-20 OL-16193-01...

  • Page 55: Initial Configuration

    Guide. Cisco IOS CLI To configure the initial router settings by using the Cisco IOS CLI, you will need to set up a console connection. For instructions on how to setup a console connection, see the “Connecting a Terminal or PC to the Console Port”...

  • Page 56: Cisco Configuration Professional Express

    Cisco Configuration Professional Express (Cisco CP Express) is installed on this device. This feature requires the one-time use of the username "cisco" with the password "cisco." The default username and password have a privilege level of 15. Please change these publicly known initial credentials using Cisco CP Express or the Cisco IOS CLI.

  • Page 57: Setup Command Facility

    At any point you may enter a question mark '?' for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets '[]'. Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...

  • Page 58: Viewing The Configuration

    The configuration is displayed: The following configuration command script was created: hostname Router enable secret 5 $1$D5P6$PYx41/lQIASK.HcSbfO5q1 enable password xxxxxx line vty 0 4 password xxxxxx Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...

  • Page 59: Verifying The Initial Configuration

    “Verifying the Initial Configuration” section on page 4-5 Step 13 verification procedures. After the initial configuration file is created, you can use the Cisco IOS CLI to perform additional configuration. Verifying the Initial Configuration To verify that the new interfaces are operating correctly, perform the following tests: •...
  • Page 60 For information on how to do basic wireless configuration on your router see the Basic Wireless Device chapter of the Cisco 860 Series and Cisco 880 Series Integrated Services Routers Software Configuration Guide. Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...

  • Page 61: Technical Specifications

    A P P E N D I X Technical Specifications This appendix provides router, port, and cabling specifications for Cisco 860 series and Cisco 880 series Integrated Services Routers (ISRs). It contains the following sections: Router Specifications, page A-1 •...

  • Page 62: Wireless Access Point

    2.4-GHz radio band Channels Country-specific 20 and 40 MHz PHY Data rate 802.11b up to 11 Mbps 802.11g up to 54 Mbps 802.11n up to 300 Mbps Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...

  • Page 63: Lan Port Pinouts

    G.SHDSL Port Connector Pinouts Table A-5 provides pinouts for the (global industry standard) symmetrical high-speed DSL (G.SHDSL) WAN port. Table A-5 G.SHDSL WAN Port Pinouts Function Unused TIP (Port1) Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...

  • Page 64: Data Bri Port Connector Pinouts

    Pin 5/T- Pin 5/R- Pin 6/T- Pin 6/R- Pin 6/T- 1. Use a straight-through cable for NT interfaces. 2. Use a crossover cable for TE interfaces. Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...

  • Page 65: Cable Specifications

    The maximum length for the Ethernet cables that connect equipment to the router is 328 ft (100 m). This length is also the maximum distance between the router and the equipment connected to it. Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...
  • Page 66 Appendix A Technical Specifications Cable Specifications Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide OL-16193-01...

This manual is also suitable for:

880 series

Table of Contents