Bosch Aquastar 2400 ES Installation Instructions Manual page 3
Tankless water heater outdoor kit
Hide thumbs
Also See for Aquastar 2400 ES:
- User manual (20 pages) ,
- Technical service bulletin (3 pages) ,
- Service bulletin (2 pages)
3
Installing outdoor kit
Replace the control panel
B Loosen the two Philips head screws located on
bottom rear of cover (see Fig. 2).
Fig. 2
Loosen the two screws
B Remove the front cover panel and replace the
original control panel shield with shield provided in
the kit, see Fig. 3.
1.
2.
3.
Fig. 3
Replace the control panel
Warning: The control panel shield
must always remain closed, except
when making adjustments, to prevent
damage to heater from weather.
B After replacing the control panel re-position the front
cover.
6 720 608 835
6720608547-14.1AL
1.
B 1. Remove the cover plate (A) installed on the top of
the appliance, as shown in Fig. 4.
B 2. Fix the supports (B) to the appliance by fastening
the four provided screws, as shown in Fig. 4.
Fig. 4
Before mounting the outdoor kit in the appliance:
B 3. Attach the gasket provided with the kit as shown
in Fig. 5.
Fig. 5
B Position the outdoor vent cap on the top of the
appliance, as shown in Fig. 6.
Installing outdoor kit
3
