Removal and Replacement
This section includes information about disassembling your TV for service.
Equipment and Tools Needed for Removal and Replacement
Tools
•
Screwdriver (in-home, service center)
•
ESD protect gloves (in-home, service center)
•
ESD protect wristband (in-home, service center; wireless if in-home)
•
RS232 cable (in-home, service center)
Equipment
•
DVM (Digital Multi-meter): Fluke 187 or similar one (in-home, service center)
•
Signal generator: VG-828 or similar one (service center)
•
ATSC-997 Signal Source (service center)
•
PC windows system (service center, portable for in-home)
Check After Service
1 If panel module or PSU Board is replaced, make sure the power jumper is set at 30V.
PL4260N PSU Board on Panel
2 Make sure all the mechanical parts such as screws are replaced properly.
3 Verify that the peripherals of the serviced points have not undergone any deterioration during servicing.
4 Verify that the screws, parts, and cables that are removed for servicing have all been returned to their proper
locations per the original setup.
5 Check the software version.
6 Check whether or not the TV works properly from each source.
Basic Adjustment Settings
No extra adjustments settings needed.
PL5060N PSU Board on Panel
HP High-Definition Plasma TV Service Manual PL4260N, PL5060N
23