Do-Not-Disturb - Panasonic DBS 576 HD Technical Manual

Hide thumbs Also See for DBS 576 HD:
Table of Contents
Chapter 7. SLT Features
Operation
See Section 750 - Key Phone User Guide for operating instructions.
Hardware Requirements
A Conference Card (VB-44120) must be installed in the System in order to conference more than
four
parties.
Related Programming
FF1-0-03: Extension COS (8-Party Conference)
FF1-0-03: Extension COS (Unsupervised Conference Call)
FF1-0-01: Splash Tone (3-party conference)
FF1-1-04: Conference Hold Call Recall Timer
FF3: Extension COS
Considerations
If all the internal parties hang up, the conference call will be disconnected. If the internal party
remains in the conversation, the conference call remains in progress.
When three
or four
4-party conference circuit is available, a conference cannot be established.
When a
fifth
party is added, the conference is moved to a conference circuit on the 8-party
conference card. If an 8-party conference circuit is not available, a
a conference.
Once an 8-party conference circuit is used, it continues to be used as long as the conference
continues.
An 8-party conference card supports up to four 8-party conference circuits. However, the card
must be placed in cabinet slots 1, 5, or 9 to support more than one 8-party conference circuit (and
jumpered accordingly).
During a conference call hold, the held conference members cannot use the HOLD key. Pressing
the key has no effect.
Conference Hold is an Exclusive Hold (only the conference originator can retrieve the
conference).
Conference Hold cannot be transferred.

Do-Not-Disturb

Description
You can make an extension unavailable by activating the Do-Not-Disturb (DND) feature. When DND
is activated, calls to that extension receive busy tone.
You can set or cancel DND from either your extension or from an alternate extension.
Operation
6-28
parties are conferenced, a built-in 4-party conference circuit is used. If no
DBS 576HD (USA) issued September 2001
Section 700 - Operation
fifth
party cannot be added to
576-50-700
Table of Contents
loading

Table of Contents