Administrating the Camera Table of Contents Basic Operations of the Administrator Menu ..............21 How to set up the Administrator menu .....21 Overview Configuration of the Administrator menu ..21 Features ..............4 Configuring the System — System Menu ..22 How to Use This User’s Guide ......5 Information Tab ..........22 System Requirements ..........
VMF settings ............ 52 Face detection Tab — Set the face detection ............54 Network disconnection Tab — Monitoring the connection of a specified IP address ............55 Setting the Action output — Action output Menu ........56 Execution Condition Tab ........56 Mail Transfer Tab —...
The illustrations of the camera and menu display in the Microsoft DirectX 9.0c or higher User’s Guide show the SNC-WR630 as an example. Web Browser Printing the User’s Guide Windows Internet Explorer Ver. 7.0, Ver. 8.0, Ver. 9.0, Depending on your system, certain displays or Ver.
The live viewer window appears (in SSL Accessing the Camera communication). Using the Web Browser After the IP address has been assigned to the camera, check that you can actually access the camera using the Web browser installed on your computer. Start the Web browser on the computer and type the IP address of the camera in the URL address bar.
Page 7
The software is optimized for Internet Explorer using medium font. To display the viewer correctly To operate the viewer correctly, set the security level of Internet Explorer to Medium or lower, as follows: Select Tools from the menu bar for Internet Explorer, then select Internet Options and click the Security tab.
Basic Configuration by the Administrator You can monitor the camera image by logging in with the initial conditions set for this network camera. You can also set various functions according to the installing position, network conditions or purpose of the camera. We recommend you configure the following items before monitoring images from the camera.
Set the user name and password of the Precautions for administrator of the camera. For details, refer to “Setting the Security — Preventing Access to Security Menu” in the Administrator menu on page the Camera by an Check the Referrer check checkbox. Unintended Third Party For details, refer to “Setting the Security —...
Operating the Camera Administrator and User This network camera identifies those who log in as the Administrator or User. This section explains how to monitor the image from the The Administrator can use all the functions of this camera using your Web browser. network camera, including camera settings.
When you display the viewer of the camera for Logging in to System the first time When you access the network camera using ActiveX viewer for the first time, the Security Warning appears. Click Yes and install ActiveX Control. You can use all Logging in as a user the functions of the viewer with ActiveX Control.
Control panel section Configuration of Live You can drag the panels to the monitor screen and Viewer configure them. To return to the operation panel, drag the panel and This section explains the functions of the parts and configure the operation panel. controls of the live viewer.
Capture Camera control panel Click to capture a still image shot by the camera and to store it in the computer. Click to open the folder to be saved. Note In the case of Windows VISTA, Windows 7, Windows 8 or Windows 8.1, if “Enable Protected Mode”...
If you select a thumbnail when registering a preset You can also use the camera control panel bar to change position, it will be displayed with a thumbnail. the camera direction. The zoom operation using the mouse wheel is available Select the Preset position name from the list.
Control bar Operating the Camera The following operation buttons are available. There are three modes of camera operation: Area zoom mode, Vector dragging mode and PTZ Control bar. You can control pan/tilt, zoom and focus in either mode. Setting You can set the streaming method, image size, The available functions for the camera operation modes frame rate, PTZ operation mode and image codec.
Zoom control Panning, tilting and zooming by Click to zoom out, and click to zoom in. specifying the area (Area zoom Zooming continues while the button remains pressed. mode only) Click and hold the left button of the mouse on the monitor image, and drag the mouse diagonally to draw a Indicates the red frame around the portion you want to enlarge.
Moving the camera to a preset Controlling the Camera position (Common operations in on a Panorama Image Area zoom and Vector dragging modes) In the panorama window, a 360° view around the camera is displayed as a panorama image. When you click on Select a preset position name from the Preset position the displayed panorama image, the camera faces the panel.
Click the point you want to watch in the panorama Switching Transmission window. The camera is moved to face toward the clicked Mode point, and the present image at the point is displayed in the monitor window. You can change the transmission mode for video/audio To rotate the panorama image data.
Search panel Playback viewer You can play, save or delete the movies recorded in the memory card. This function is available only in the following users. • Administrator • When Viewer mode is set to Full Specify the search period. Start Select the start time for searching.
Save recorded movie Stop button Click this button to stop a movie playing. Save the selected movie to your computer. Click open the folder in which the movie is to be saved. Play button Play the movie. Delete recorded movie Click this button to play the movie at the normal speed Delete the selected movie(s).
Example: “Date & time” tab of “System” menu Administrating the Camera This section explains how to set the functions of the camera by the Administrator. See page 22 for details of the menu tabs and setting For details about monitoring the camera image, see options.
Security Configuring the System Displays the Security menu for setting the login user name and password to specify which computer(s) can — System Menu connect to the camera. (“Setting the Security — Security Menu” on page 36) When you click System in the Administrator menu, the PTZF control...
You can select the format between yyyy-mm-dd In case of (UTC-06:00) Central Standard Time (USA hh:mm:ss (year-month-day hour:minutes:seconds), and Canada); mm-dd-yyyy hh:mm:ss (month-day-year CentralStandardTime6DaylightTime1,M3.2.0,M11.1.0 hour:minutes:seconds), and dd-mm-yyyy hh:mm:ss (day-month-year hour:minutes:seconds). The name of the time zone is CentralStandardTime and the time difference is 6 hours. The name of the summer Time setting time is DaylightTime, and the summer time offset from Select how to set the day and time.
Click Save, and follow the instructions on the Web browser to specify the folder and save the setting data of the camera. The file name preset at the factory is “snc-wr630.cfg” for SNC-WR630. Restore setting Loads the stored setting data of the camera.
Schedule Setting the Camera Set time and date to perform the refresh operation periodically. Image and Audio Notes — Video / Audio Menu • Camera operation will be canceled when you run video & PT drive refresh while operating the camera. When you click Video / Audio in the Administrator...
Iris priority: The camera performs the gain and shutter ATW: Eliminating the influences caused by speed adjustments automatically, and you can select environmental illumination or lights, adjust the white the iris. balance automatically to reproduce original colors of Manual: Adjust the gain, iris and shutter speed the objects (approximately 2000 K to manually.
OK/Cancel Notes See “Buttons common to every menu” on page 21. • Some parts of the screen may not be displayed depending on the image size. • If the image size is 720 × 574 or 720 × 480, the full Video codec Tab image is displayed but not in the 1:1 pixel aspect ratio.
Maximum bit rate limit Note Enable the check box when Bit rate compression mode is set to VBR, to set the maximum value of the bit rate. When you change the Audio setting, click Refresh on the Web browser to reflect the change on the opening Max: Set the maximum value of the bit rate when the live viewer page.
Text color Notes Select the font color of the superimposed text. • For setting the superimposing, set Image size1 in the Video codec tab of the Video / Audio menu to the Background color maximum rate. Select the background color of the superimposed text. •...
Timer Effect Normally the camera works in day mode. It switches to Set the effect of privacy masks. night mode at the time you set in Timer of Day/Night in the Schedule menu. Color Specify the color of privacy masks. This setting is Sensor input common to every privacy mask.
Privacy mask setting range Streaming Tab The setting range of the privacy mask is limited as follows: Pan angle: Tilt angle: 20° Use this tab to set the items for the transmission by unicast or multicast. 65° Unicast streaming Specify the transmission port numbers of the H.264 video data and audio data to be used when Unicast is Notes selected from the Connection drop-down list in the...
specified number) are used for audio data and an odd number with 1 added to the specified communication and control. When operating multi- number) are used for video data communication and transmission at the same time, a different port number control.
At the 0 setting, time out of the Keep-Alive command is Configuring the Network not available. — Network Menu OK/Cancel See “Buttons common to every menu” on page 21. When you click Network in the Administrator menu, the Network menu appears. Use this menu to configure the network to connect the camera and the computer.
IP address Host name Displays the current IP address. Type the host name of the camera to be transmitted to the DHCP server. This setting is valid only when Subnet mask Obtain an IP address automatically (DHCP) is Displays the current subnet mask. selected.
IPv4 QoS Type the MTU value for the Ethernet port. Enable To obtain DNS server address Select the checkbox to configure the QoS setting for automatically IPv4. Select Obtain DNS server address automatically. The Primary DNS server and Secondary DNS Rule server are assigned automatically.
Move up Setting the Security Increases the priority of the rule. Select a rule from the QoS table to prioritize and click — Security Menu Move up. When you click Security in the Administrator menu, the Move down Decreases the priority of the rule. Security menu appears.
Light: In addition to the View mode, the user can select Default policy the image size of the live viewer, select codec and Select the basic policy of the limit from Allow and Deny capture a still image. for the computers specified in the Network address/ View: The user can only monitor the camera image.
• Reload the window when you change the SSL setting. SSL Tab Press the F5 key on the keyboard to reload. Common setting SSL function Select Enable to use the SSL function. When Enable (Allow HTTP connection for some clients) is selected, both HTTP and SSL connections are allowed.
window from the browser. In this case, reload the Self-signed certificate generation window. Press the F5 key on the keyboard to reload. A self-signed certificate can be generated in the camera to be used when Use a self-signed certificate (For test use) is selected from Certificate options.
Private key password Note Type the password for the private key information included in the certificate using up to 50 characters. This Import process will be invalid if the selected file is not a text box is active only when Certificate options is set to CA certificate.
“.cer”. Double-click this file. The following Select Automatically selects the certificate store Certificate dialog appears. based on the type of certificate and click Next. Completing the Certificate Import Wizard appears. Check the contents, then click Finish. The CA certificate will be installed. To remove an installed CA Click Installation Certificate..
There may be a case that a certificate cannot be 802.1X Tab removed by the steps above due to the type of certificate. Check the installation condition and remove it following the steps below. Note You need to log in as Administrator to perform these steps.
• When using the 802.1X authentication function, EAP identity always configure the settings after setting the date and Type the user name to identify the client in the 802.1X time of the camera. If the date and time are incorrect, authentication server up to 250 characters.
Status To import the CA certificate Shows if the status of the client certificate is valid or Click Browse… to select the CA certificate to be invalid. imported. Valid means the client certificate is correctly stored Click the OK button appearing on the dialog, and the and set.
Setting the PTZF control Register the values of the Host name and Port No. you typed to the list of the selected number. — PTZF control Menu Delete When you click PTZF control in the Administrator menu, Delete the contents of the list selected in No. the PTZF control menu appears.
Enable Preset position Tab — Saving pan/ Select the checkbox to enable the auto flip function. tilt/zoom position When you hold on the control panel to make the direction of the camera pass through the point where it faces the ground, the auto flip function is activated, and the displayed picture is reversed.
Speed Preset tour Tab — Setting a preset Select the speed of camera movement between 1 and 23, tour or Fastest from the drop-down list. The camera moves faster with a higher number setting. The fastest speed is obtained with Fastest. Stay time Type a period of time during which the camera is to stay at each preset position, between 1 and 3600 seconds.
Event condition 1, 2, 3, 4, 5 Setting the Sensor input/ Select the event condition. You can combine the alarm using the following event Camera tampering execute conditions. and: detect when both conditions happen within a detection/Motion specified interval regardless of the sequence. or: detect when either condition happens.
Detection status Sensor input Tab — Set the sensor Display the tampering detection state of the time when input 1/2/3/4 Camera tampering detection tab is opened. To clear the detection status, click Clear button. OK/Cancel See “Buttons common to every menu” on page 21. Motion detection Tab —...
Intrusion Preset position You can set the VMD and VMF settings for each preset When a moving object enters the designated area, an position. alarm sounds. Selected preset Passing Displays the registered preset positions. Click a preset A passage line is determined, and when a moving object position to position the camera, then make the VMD and passes the setting line, an alarm sounds.
Page 51
When you place the cursor on the area, the cursor Detection response changes to a crossed arrow, which you can drag to Set the response velocity of motion detection. move the area. When you place the cursor on the vertex of the area, the cursor changes to n, which you can drag to move the vertex.
This criterion is for whether a moving object exists in VMF settings the trigger area. Set the alarm to sound when the specified conditions Similar to an active window, a trigger area can also be (Intrusion, Passing, Left object, Removed object) of moved and vertexes can be moved, added or deleted.
Left object Trigger size Specify the minimum trigger size and maximum trigger size of motion. To specify the size, you can either enter values or drag the vertexes of the area. This criterion is for whether a moving object has been left in the trigger area.
Trigger speed conditions of 2 are met within 3 seconds from when the inspection conditions of 1 are met. Specify the minimum and maximum speeds to be detected. VMF status indicator of Matching decision The indicator is on when the set filter type conditions are met.
OK/Cancel Notes Click OK to finalize any changes made to the settings • Before actual use, perform an operation test and and send them to the camera. confirm that the face detection function works If you click Cancel, changes made to the settings will be correctly.
Mail Transfer Tab — Setting the Setting the Action e-Mail (SMTP) Function output — Action output Menu Action output When you click in the Administrator menu, the Action output menu appears. The Action output menu consists of the Execution Condition, Mail Transfer, Alarm output, Edge Storage, Voice alert, HTTP alarm notification and FTP still image sending tabs.
POP before SMTP: Select when POP before SMTP Administrator e-mail address authentication is required. Type the Administrator e-mail address using up to 64 Combination of POP before SMTP and SMTP: characters. Select when both SMTP authentication and POP This address is used for reply e-mails and sending before SMTP authentication is required.
and sequential number (2 digits), thus adding 14- digit number to the image file name. For details on connection of peripheral devices to the alarm output of the I/O port, refer to the supplied Periodical execution Installation Manual. You can set to send e-mails periodically. Duration Image file name Type the file name you want to assign to the image to be...
• When you record the JPEG with image size 1280 × 720 or above, set the video codec as follows: – SNC-WR630/WR632: Set the Image quality below – SNC-WR600/WR602: Set the Image quality below – Set the Frame rate to 1 fps.
Path: Displays the path name of the recording still Audio: Set whether to record the audio signals input image file. from the camera. When you select a file, a still image will be displayed. Select the checkbox to record. Delete: Click Delete to delete the selected folder or file. Note If you select a folder, any files in the folder will also be deleted.
You can download the application guide and SNC Password audio upload tool from the following URL. Type the password for authentication using up to 64 http://www.sony.net/ipela/snc characters. Voice alert 1, 2, 3 Notification at the beginning of event detection Select the checkbox for the alarm notification when the Up to three voice alerts can be set.
OK/Cancel Suffix Select a suffix to be added to the file name used when the See “Buttons common to every menu” on page 21. image is sent. Date & time: The date & time suffix is added to the image file name. FTP still image sending Tab The date &...
Sequence number clear Manual sending If you click Clear, the suffix of the Sequence number returns 1. Image to be sent Select the video codec mode of the image of manual Test sending. If you click Execute, the image will be sent to the FTP For detailed settings of video codec mode, see the Video server once for testing according to the settings of codec tab in the Video / Audio menu.
The CLOUD service is not available in some regions. When you click the Schedule tab, the setting menu for For details, contact an authorized Sony dealer. each action is displayed. You can set the schedule of the following actions; Mail Transfer (Event), Mail...
• The CLOUD service can be enable only when the NTP server is specified, and the time setting is set to Synchronize with NTP. Registered information When the checkbox of CLOUD service is selected, the registered information appears. Organization The registered organization information appears. Customer code The registered customer code appears.
DNS server Others Acronym for Domain Name System server. As an IP address required for connecting to the device on an IP network is numerical and difficult to remember, the Domain Name System was established. A domain name Glossary is alphabetic and is easier to remember. When a client computer uses a domain name to connect to another computer, it asks a DNS server to translate the name into ActiveX control...
Network bandwidth the other protocol, TCP, UDP can transmit data faster, but reliable communication is not guaranteed. Bit rate that can be used for networking. Unicast NTP server Transmission of data to specified equipment on a Network time server that transmits and receives time network by specifying a single address.