WARNING: This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage.
Emerson Electric Co. Substitution of k. Two 50W halogen mini candelabra parts or accessories not designated for bulbs use with this product by Emerson Electric l. One loose parts bag containing: Co. could result in personal injury or 1. Three 12 ga. wire connectors property damage.
Page 4
BP7407-1 44" & 52" Curva Sky 8/31/10 4:10 PM Page 4 A. FAN MOTOR ASSEMBLY B. CEILING TRIM RING F. LIGHT E. LOWER KIT PLATE HOUSING C. CEILING MOUNTING PLATE H. NO-LIGHT COVER PLATE D. FAN BLADES (3) K. 50W MINI CANDELABRA HALOGEN BULBS I.
Ceiling Fan Procedures General KEY HOLE SLOT (2) Your Emerson ceiling fan comes supplied with a Fan/Light Remote Control which consists of a receiver mounted inside the ceiling cover of the fan motor housing. This system allows you to regulate your ceiling Figure 2 fan speed and light intensity.
BP7407-1 44" & 52" Curva Sky 8/31/10 4:10 PM Page 6 6. Remove and retain the wire connectors How to Hang from the white and blue wires. Your Ceiling Fan 7. Connect the white wire from the ceiling fan to the white wire of the light kit plate WARNING (Figure 3).
BP7407-1 44" & 52" Curva Sky 8/31/10 4:10 PM Page 7 2. Pull the electrical supply black, white How to Wire and ground wires through the center Your Ceiling Fan opening of the ceiling mounting plate before securing the plate to the outlet If you feel that you do not have enough box (Figure 6).
Page 8
BP7407-1 44" & 52" Curva Sky 8/31/10 4:10 PM Page 8 WARNING WARNING Check to see that all connections are To avoid possible fire or shock, make tight, including ground, and that no bare sure that the electrical wires are wire is visible at the wire connectors, completely inside the outlet box and except for the ground wire.
BP7407-1 44" & 52" Curva Sky 8/31/10 4:10 PM Page 9 How to Assemble Your How to Assemble Your Light Kit Glass Shade No Light Cover Plate 1. Screw in two 50-watt (maximum) WARNING halogen mini candelabra base bulbs in the light kit plate sockets (Figure 13).
A storage bracket is provided for holding your remote control when not in use. If you Your Emerson receiver is equipped with a desire to use the bracket, install it on a wall preset memory feature. If the AC supply to...
BP7407-1 44" & 52" Curva Sky 8/31/10 4:10 PM Page 11 Setting Operating Frequency of Remote Control Your remote control has code switches which must be set in one of 32 possible code combinations (Figure 16). The five levers (numbered 1, 2, 3, 4, and 5) on the switches are factory-set in the ON (up) position.
40 feet, try placing use with this product by Emerson Electric the antenna wire outside of the ceiling Co. could result in personal injury or cover.
Page 13
BP7407-1 44" & 52" Curva Sky 8/31/10 4:10 PM Page 13 the breaker to activate. If this occurs, shut Light Kit Circuit Breaker off the electricity to the ceiling fan and - Canada Only check that the lamps are each 50W In accordance with Federal Law, this maximum.
Page 14
BP7407-1 44" & 52" Curva Sky 8/31/10 4:10 PM Page 14 Repair Parts Listing Damp Part Numbers Wet Part Numbers Model No. Model No. Model No. Model No. Model No. Model No. Model No. Model No. No. Description CF144BS00 CF152BS00 CF144CRM00 CF152CRM00 CF144WW00 CF152WW00 CF144ORB00 CF152ORB00 Ceiling Mounting Plate 763987...
BP7407-1 44" & 52" Curva Sky 8/31/10 4:10 PM Page 15 Repair Parts (Canada Only) 8 - 52" 9 - 44" Before discarding packaging material, be certain all parts have been removed. HOW TO ORDER REPAIR PARTS WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION: •...
You will be responsible for all insurance, freight or other transportation charges to our factory or authorized service center. Your Emerson Air Comfort Ceiling Fan should be properly packed to avoid damage in transit since we will not be responsible for any such damage.