Installer Setting-E.s.p - LG Single "A" Service Manual

Part 2 Functions & Controls

Installer Setting -E.S.P.

What is an E.S.P function?

This is the function that decides the strength of the wind for each wind level and because this function is to make the

installation easier, please do not use this function when using the remote controller.

If you set ESP incorrectly, the air conditioner may malfunction.

This setting must be carried out by a certificated-technician.

This function is used for only Duct product.

Copyright ©2008 LG Electronics. Inc. All right reserved.

Only for training and service purposes

1

Press

button for 4 seconds

to enter the installer setting

mode until timer segment

display "01:01".

2

Repeat pressing

Function code 03.

Function Code

ESP step

3

Set ESP step by pressing

(01: very low, 02: low, 03: medium, 04:

high. 05: power)

4

Move to ESP setting by pressing

button.

5

Press

button to select ESP

value(0~255).

- 36 -

button to select

ESP value

button.

LGE Internal Use Only