Table of Contents
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor
2.2 DIGITAL OPERATOR DISPLAY
All functions of the FP5/GP5 are accessed using the JVOP-130P Digi-
tal Operator. Below are descriptions of the display and keypad sections.
DRIVE FWD REV
F
requency
0.0 HZ
Fref
Fout
F/R
Montr
Vmtr
V/F
FLA
PID
DIGITAL OPERATOR
JVOP-130P
DSPL
LOCAL
REMOTE
RUN
Display Key
Scrolls through display monitors and Quick-
Start parameters, and allows access to all
parameters.
FP5/GP5 User's Manual
REMOTE
Operation Mode Indicators:
SEQ
REF
DRIVE: Lit when in operation mode.
FWD:
Lit when there is a forward run command input.
R
ef
REV:
Lit when there is a reverse run command input.
SEQ:
Lit when the run command from the control circuit
terminal or serial communication is enabled.
REF:
Lit when the frequency reference from control cir-
Iout
kWout
cuit terminals FV or FI, or serial communication is
Accel
Decel
enabled.
Fgain
Fbias
kWsav
PRGM
Display (LCD)
Displays set values of each function or monitoring values such
as output frequency and current (2 line × 16 character alphanu-
meric).
Enter Key
ENTER
Displays the current value of each parameter and allows new
values to be entered.
Increase/Decrease Keys
STOP
Changes set values or parameter numbers.
RESET
∧: Increment key
∨: Decrement key
Operation Command Keys
Operation command keys operate the inverter.
STOP/RESET: Red LED lights after depressing STOP key.
RUN:
Operation Mode Selection Key
Alternate between REMOTE and LOCAL (digital operator)
operation.
Figure 17 Digital Operator Display at Power-up
Chapter 2 - Operation
Digital Operator Display
Inverter operation is stopped. (resets operation
after faults; reset is disabled while run com-
mand is ON)
Red LED lights after depressing RUN key.
Inverter operation begins
35
Hide quick links:
Table of Contents
