Installation Location - GE Monogram ZEW145 Installation Instructions Manual
Monogram component cooktop system
Hide thumbs
Also See for Monogram ZEW145:
- Use and care manual (36 pages) ,
- Use and care & installation manual (64 pages)
Table of Contents
• Whenever possible, avoid placing cabinetry
Installation
Location
• If cabinetry is used above the cooking
EXCEPTION: Installation of a listed
microwave oven or cooking appliance over the
cooktop(s) shall conform to the installation
instructions packed with that appliance.
• Installation must conform with local codes.
Clearances:
• When installed electric components require
Gas components require:
6
directly above the cooking surface.
surface:
–Use cabinets no more than 13" deep.
–Maintain 30" minimum clearance between
cooktop(s) and unprotected cabinets
directly above the cooktop.
–If clearance is less than 30", protect cabinet
bottoms with flame-retardant millboard at
least 1/4" thick or gypsum board at least
3/16" thick covered with 28 gauge sheet
steel or .02" thick copper.
–Clearance between cooktop and protected
cabinetry must not be less than 24".
–Working areas next to the cooktops should
have 18" minimum clearance between the
countertop and the cabinet bottom.
the following clearances:
– 2" min. from front of cooktop to front edge
of countertop,
– 1" min. from back of cooktop to rear wall,
– 1" min. from side of cooktop to side wall.
– 2" min. from back of cooktop to rear wall,
– 2" min. from side of cooktop to side wall.
Cabinetry
Component Cooktop System
13"
Max
One or
More
Component
30"
Cooktops
Min.
*2" Min.
36"
to Front
Edge
* Gas in side to side orientation
requires 2" min. to rear wall.
** Gas requires 2" min. to side wall.
*1" Min.
18"
to wall
Min.
**1" Min.
to Wall
*1" Min.
to Wall
Table of Contents
