Clearing Paper Jams Caused By A Wrong Paper Size Setting - Toshiba E-Studio 655 Troubleshooting Manual

1 TROUBLESHOOTING FOR THE HARDWARE

21

Close the fuser unit cover slowly.

22

Open the duplexer guide.

23

Remove the jammed paper.

24

Close the duplexer guide.

25

Push the transfer/transport unit into the equipment

carefully while holding its lever. Then turn the lever

counterclockwise by 90 degrees to lock it.

26

Close the front cover of the equipment.

Paper jams occur when there is a mismatch between the size of the paper in a drawer or the bypass tray and the size

registered for the corresponding drawer or the bypass tray in the equipment. The message "Check paper size setting on

control panel for drawer N" or "Check paper size setting on control panel for Bypass" appears on the touch panel.

26

Clearing a Paper Jam