Name Display - NEC DT300 Series User Manual
Dt300/dt700 series terminals
Hide thumbs
Also See for DT300 Series:
- User manual (42 pages) ,
- Quick reference manual (16 pages) ,
- Quick reference manual (16 pages)
Table of Contents
Name Display
NOTE: Requires Display Phone
A name with up to 16 characters can be entered to
display the name on other Dterm telephones when
making a call.
Press Speaker key. Receive dial tone.
Dial the Name Assignment access code and receive
special dial tone.
Using the keypad, depress the key with the desired
letter to display the first letter on the key. The display
will indicate the numerical designation. Subsequent
depressions will advance through the letters on that
key. The Dial Pad Key Table below can be used as a
guide to indicate the key and the number of
depressions required to display numbers, letters,
spaces and periods.
When the desired letter is displayed, depression of
the Transfer key will change the letter to a lower case
letter (default is upper case). Depress the Hold key to
enter that letter and advance to the next entry.
Repeat the previous two steps until the desired name
is displayed and entered.
Press Speaker key.
For example, to enter "Paul":
NOTE: When adding/changing/deleting name display
for an extension that appears on a key of a 16LD
phone a reset of the 16 LD phone is required and can
be accomplished by an unplug/plug-in of the phone.
For the 16LD phone using one of the line keys as
speed dial will only display 8 characters; For a name
the first 7 characters plus * for names longer than 8
characters and the * plus last 7 digits of a number
longer than 8 digits.
Example: Name display programmed is ABCDEFGHI
button will show ABCDEFG*. Number display
programmed is 123456789 button will show *3456789.
47
Hide quick links:
Table of Contents
