Contents 1 Safety 2 Your Bluetooth Adapter Introduction What's in the box 3 Before use Connect audio cables Connect power 4 Use the Bluetooth adapter Connect a Bluetooth device Disconnect a device Reconnect a device Clear pairing history 5 Product information Amplifier Bluetooth General information...
1 Safety Read these instructions. Follow all instructions. Do not use this apparatus near water. Do not place near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
2 Your Bluetooth Adapter Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www. philips.com. If you contact the Consumer Care, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the product.
3 Before use Connect a coaxial audio cable between the COAXIAL OUT socket on the • Bluetooth adapter, and • the coaxial audio input socket on your Always follow the instructions in this chapter in Hi-Fi system. sequence. Note Connect audio cables •...
Connect power Caution • Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit. • Risk of electric shock! Hold the plug securely when unplugging the device. Note • The type plate is located on the bottom of the Bluetooth adaptor.
Bluetooth feature and search for devices. Remote Control Profile (AVRCP). • The product can connect a maximum of 3 Bluetooth In the device list, select PHILIPS AEA2700. devices simultaneously. • If a message prompts for the • Make sure that Bluetooth function is enabled on your...
Connect the fourth device manually (see 'Connect manually' on page 6). • Press and hold for 2 seconds to switch AEA2700 to pairing mode, and then connect the fourth Bluetooth device by NFC (see 'Connect easily by NFC' on page 6). » Once the fourth device is connected, the earliest connected device will be replaced, if there is no music play.
5 Product General information information AC Power Model: AS030-090- EE033 / EML0900330V (Philips) Input: 100-240 V ~, Note 50/60 Hz, 0.15 A • Product information is subject to change without prior Output: 9 V 0.33 A notice. Operation Power < 3 W Consumption Standby Power < 0.5 W Consumption Amplifier...
If the problem remains and the adapter. unsolved, go to the Philips Web page (www. • For some devices, the Bluetooth philips.com/support). When you contact the connection may be deactivated Consumer Care, make sure that the product automatically as a power-saving feature.
The Bluetooth® word mark and logos are of Directive 1999/5/EC. You can find the registered trademarks owned by Bluetooth Declaration of Conformity on www.philips.com/ SIG, Inc. and any use of such marks by WOOX support. Innovations is under license.
Page 14
WOOX Innovations, and is the manufacturer of the product. WOOX Innovations is the warrantor in relation to the product with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.