Datalogic™ Magellan ® Bioptic Aux Port Configuration; Wincor Mode A - Honeywell Hyperion 1300g User Manual
General purpose handheld linear scanner
Hide thumbs
Also See for Hyperion 1300g:
- User manual (192 pages) ,
- Quick start manual (13 pages) ,
- Get started (3 pages)
Table of Contents
Datalogic™ Magellan
Aux Port Configuration
Scan the following Plug and Play code to program the scanner for a Datalogic
Magellan bioptic scanner auxiliary port configuration. This bar code sets the
baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
Note: If you are having unexpected results with this programming code, scan
the
Activate Defaults
programming code above.
Wincor Mode A
Scan the following Plug and Play code to program the scanner for Wincor Mode
A mode. This bar code sets the baud rate to 9600 bps and the data format to 8
data bits, odd parity, 1 stop bit.
Note: If you are having unexpected results with this programming code, scan
the
Activate Defaults
programming code above.
®
Datalogic Magellan Bioptic Settings
bar code on page 1-5 first, then scan the
Wincor Mode A
bar code on page 1-5 first, then scan the
Bioptic
2 - 7
Hide quick links:
Table of Contents
