Selecting The Oven Mode - Bosch HDS256U Use And Care Manual

Freestanding dual fuel range

Hide thumbs Also See for HDS256U:

Installation instructions manual (24 pages)

Use and care manual (104 pages)

100

101

102

103

104

page of 104

/ 104
Contents
Table of Contents

Table of Contents

Available languages

Setting the Cooking Mode

1. Touch COOKING MODE.

2. BAKE will flash in the display.

If no further setting is made within 5 seconds, control will

beep and flash. If this occurs, press START.

3. To change the cooking mode, turn knob.

4. Push START.

The selected mode will appear in the display, along with

the default temperature for that mode, which will be

blinking.

5. To select a different temperature, turn knob to the

right or left (in 5° increments) to desired temperature.

6. Touch START. If START is not touched, oven will

automatically turn on in 5 seconds.

7. The display alternates between the cooking mode and

preheat.

The preheated temperature is also displayed, starting at

100ºF. The actual temperature increases until set

temperature is reached, at which point the oven will

beep.

8. To change temperature during cooking, touch

Temperature. Turn the knob to select new

Temperature and press START.

9. Once cooking has been completed, touch OFF to turn off

oven.

Note: After the oven has been turned off, HOT appears in the

display where the cooking mode was. This is to indicate that

the oven is off but still hot. When the oven temperature drops

below 176° F, HOT is no longer seen in the display.

Oven Operation Time

The oven will automatically shut off after 12 hours (24 hours

if the time format is set for 24 hour in the SELECT FUNCTION

section).

Oven Vent

The oven vent is located below the display above the rear left

cooktop burner.

It is normal to see steam escaping from the vent and condensation

may collect on the backguard and cooktop.

This area may become hot when the oven is in use.

Do not block the vent as it is important for air circulation.