Table of Contents
Error No.
Message
ER24
Cannot get TYPE data.
ER26
Over run error.
ER27
Framing error.
ER28
Parity error.
ER30
Illegal select BLOCK !
ER31
EPV is not supported BLOCK
operation
ER32
Cannot execute when ECC set.
ER33
ECC BLOCK address unknown.
ER34
Unpacked BCD format error.
ER35
Cannot get SLAVE address.
(1 bit)
ER36
Cannot get SLAVE address.
(9 bit)
ER37
Cannot get SLAVE address.
(ACK)
ER38
IIC WRITE error. (1 bit)
ER39
IIC WRITE error. (9 bit)
ER3A
IIC WRITE error. (ACK)
ER3B
IIC READ error. (1 bit)
ER3C
IIC READ error. (9 bit)
CHAPTER 8 ERROR MESSAGES AND REMEDIAL ACTIONS
Cause
The data stored in flash memory cannot be read.
Action
The internal flash memory in the PG-FP3 may have been
destroyed.
Cause
An overrun error was detected during communication with the host
machine.
Action
Check the connection environment with the host machine.
Cause
A framing error was detected during communication with the host
machine.
Action
Check the connection environment with the host machine.
Cause
A parity error was detected during communication with the host
machine.
Action
Check the connection environment with the host machine.
Cause
The block set with TYPE setting does not exist.
Action
Check the block information in the TYPE settings.
Cause
The E.P.V. command was executed in the BLOCK mode.
Action
The version of the PG-FP3 terminal software does not match.
Cause
An attempt was made to perform batch processing with a device
with ECC memory.
Action
Batch processing cannot be performed with a device with ECC
memory.
Cause
An ECC memory address was not entered.
Action
An ECC memory address was not entered correctly.
Cause
A value exceeding the range was specified.
Action
The version of the PG-FP3 terminal software does not match.
Cause
IIC communication error
Action
Check the wiring and other devices on IIC.
Cause
IIC communication error
Action
Check the wiring and other devices on IIC.
Cause
IIC communication error
Action
Check the target microcontroller.
Cause
IIC communication error
Action
Check the wiring and other devices on IIC.
Cause
IIC communication error
Action
Check the wiring and other devices on IIC.
Cause
IIC communication error
Action
Check the target microcontroller.
Cause
IIC communication error
Action
Check the wiring and other devices on IIC.
Cause
IIC communication error
Action
Check the wiring and other devices on IIC.
User's Manual U13502EJ2V0UM00
Cause/action
89
- Quick Links:
- Function Specifications
Hide quick links:
Table of Contents
